CEM 26 EMISSIONS MONITORING
Automatic gas chromatography driven air monitoring technology to be highlighted at CEM 2023
Chromatotec Group, an industry leader in automatic gas chromatographs (autoGCs) for online monitoring and has been off ering a wide range of analysers for the detection of odourised molecules since 1975. With a remarkable level of experience of over 40 years, Chromatotec continues to deliver a comprehensive range of innovative analysers manufactured in France. These advanced instruments enable precise tracking of concentration levels in parts per trillion (ppt), parts per billion (ppb), parts per million (ppm) and percentages for various applications.
Chromatotec will be participating in the International Conference and Exhibition on Emissions monitoring (CEM) held in Barcelona from 20th to 22nd September 2023 . During the exhibition, Chromatotec will show one of its products portfolio, the MEDOR® analyser. This highly sophisticated instrument provides continuous, online analysis of sulphur compounds with the detection low to 1 ppb in natural and biogas. The system can analyse a variety of sulphur compounds, including H2
odorant. The system utilises proven gas chromatography (GC) technology that has been developed and improved over 35 years for odorisation and safety applications in various processes. Chromatotec’s systems have gained recognition worldwide from standards organisations such as ISO, ASTM, and CSA, attesting to their quality and performance.
The MEDOR® is available in various confi gurations to meet specifi c monitoring requirements. For process control applications, the H2 of H2
S, with a detection limit below 1 ppb and a cycle time as low as 2 minutes. Linearity calculations for traces and ultra-traces of compounds in the ppb concentration range can be performed using standard permeation tubes and successive dilution points. The energyMEDOR® is particularly well-suited for hydrodesulphurisation of natural gas, providing analysis of compounds such as THT, H2
For More Info, email: email:
The wide range of MEDOR® technology designed by Chromatotec provides customers with extensive possibilities for sulphur analysis, from process control to odorisation measurement. Chromatotec’s product range, including also Chroma S and airmoS analysers, can detect additional sulphur compounds such as carbonyl sulphide (COS) using a Flame Photometric Detector (FPD). From standard analysers to customised solutions to meet customers’ needs, Chromatotec is committed to delivering exclusive turnkey systems in the fi eld of gas analysis. More information online:
ilmt.co/PL/Ve1q
For More Info, email: email:
For More Info, email: email:
60789pr@reply-direct.com
Globally acclaimed emission monitoring specialists return to CEM Conference
Since fi rst opening its doors in 1995, Fuji Electric France has built a solid reputation as a reliable partner for customers across a diverse range of industrial sectors in the EMEA region. As a highly reputable provider of pioneering emission monitoring instrumentation, Fuji Electric France will once again participate at the CEM Exhibition and Conference, where they will showcase their in- demand technology to visitors and delegates.
The excellent reputation of Fuji Electric France in the emission monitoring market has been earned by the exceptional performance and reliability of its instrumentation. By combining state-of- the-art technology with their global logistics network, Fuji Electric delivers customised solutions for energy-intensive industries, including manufacturing and information, factory automation, data and logistics centres.
Monitoring System (CEMS), an in-demand solution that provides long-term and superior stability for industrial emission monitoring. The Fuji CEMS performs simultaneous measurement of up to 14 components in fl ue gas, off ering a comprehensive and precise view of emissions to their customers. This advanced system is capable of continuous monitoring of gas emissions for a wide variety of sectors including natural gas, fuel, coal, and biomass combustion plants, as well as diverse industrial processes. Key components measured include CO, CO2
For More Info, email: email:
Fuji Electric France’s CEMS has achieved QAL1 certifi cation by TÜV in accordance with EN 14181, EN ISO 14956, and EN 15267 standards. Visitors to CEM 2023 will have a great opportunity to discuss their exact CEMS needs with Fuji’s expert team heading to Barcelona.
More information online:
ilmt.co/PL/776Y
For More Info, email: email:
For More Info, email: email:
60791pr@reply-direct.com
CEM to host display from globally renowned continuous mercury analysis specialists
Lumex Instruments has been developing and manufacturing laboratory and industrial analytical instrumentation for pollution monitoring for almost three decades and they will be showcasing some of their latest technology at the upcoming CEM Conference and Exhibition.
Their cutting-edge devices are used in over 90 diff erent countries for air monitoring, water and wastewater analysis and industrial measurements in a diversity of sectors ranging from agriculture, food and beverage quality and safety control, the energy industries, and pharmaceutical and biochemical applications. Lumex Instruments’ products off er over 120 applications for the measurement of organic and inorganic chemicals in liquids, solids and gases.
Harnessing both traditional and contemporary cutting-edge solutions to provide well-established reliable applications and innovative methods, Lumex has, so far, developed, manufactured and provided more than 30,000 instruments to customers across the globe. Lumex combines its high standards of product development with a fl exible customised approach to maximise the effi ciency of their customers’ operations. Their innovations are created to make the analyses cost-effi cient, precise and easy to run maintain and service with many of their applications developed in accordance with international standards, including ASTM, ISO, EN and EPA.
For More Info, email: email:
One of the highlights on the Lumex stand at CEM 2023 will be their mercury monitor RA-915AM, developed for continuous mercury monitoring and ideal for permanent unattended installation at air/gas monitoring stations. This device performs direct rapid analysis of mercury, facilitating prompt reaction when variations of mercury concentrations occur. These analysers need minimal maintenance or interaction from personnel, with servicing usually carried out onsite during maintenance shutdowns. In addition, the RA-915AM requires no reagents or consumables and only the fi lter and lamp will need occasional replacing during maintenance schedules; the unit’s remote data transfer enables operators to connect the monitor to data collection systems via RS232, Modbus, and analogue outputs.
Diff erent customised modifi cations exist for monitoring of ambient air, process gases or for natural gas (in the stream and monitoring the MRU units). More information online:
ilmt.co/PL/zBOD
For More Info, email: email:
For More Info, email: email:
60753pr@reply-direct.com , NOX , N2 O, SO2 , NH3 , HCl, CH4 , O2 , humidity and dusts.
The Fuji CEMS include high-performance NDIR gas analysers, an oxygen analyser, and a specially designed, outstanding level sample probe and gas conditioning system. These CEMS are meticulously developed and designed and then consistently upgraded with the most contemporary technologies to ensure compliance with stringent European and local environmental regulations. The Data Acquisition and Handling System (Fuji DAHS) collects the output and records emissions data from the CEMS systems (Fuji CEMS), providing a comprehensive insight for analysis and reporting.
PENS AND NOTE PADS: At the CEM Exhibition and Conference, Fuji Electric France will feature its Continuous Emissions LANYARD SPONSOR: S MEDOR® can analyse traces and ultra-traces S, and MeSH. Chromatotec also off ers a solution for odorisation control with the THT MEDOR (THT, TBM). For hazardous areas, they provide ATEX and CSA International compliant solutions, including the Pressurised type MEDOR Ex for gas cleaning and desulphurisation, and the fl ameproof type energyMEDOR® for impurity detection in natural gas. S, methyl and ethyl mercaptan, as well as
CEM SPONSORS:
LUNCH AND COFFEE BREAK:
MIXER, REGISTRATION AND BADGE:
20TH - 22ND SEPTEMBER | BARCELONA, SPAIN
WWW.CEM.UK.COM
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128
