ENVIRONMENTAL LABORATORY 7
NPL Gas mixture standard preparation
© copyright NPL oxygen to ensure that it will help to cure, not harm patients.
International standards also govern the use of nitrogen in pharmaceutical drug manufacturing applications. In some cases, nitrogen is used as an active pharmaceutical ingredient and in other applications, such as packaging, it is used as processing aid. The European, Japanese and US Pharmacopeia all recognise the importance of nitrogen in pharmaceutical applications and have specified stringent quality standards to ensure that the purity is appropriate.
The examples above focus on three different gases: hydrogen, oxygen and nitrogen. What they share are a minimum purity for the gas and maximum concentrations of impurities which could be harmful to the application. Some also specify the analytical method to conduct the purity assay or the analysis of trace impurities. So, in the consideration of a future standardised purity specification for CO2
in CCS applications, there are some parallels to learn from.
The importance of carbon dioxide purity in CCS applications
In the realm of international metrology, many issues are being considered as the debate about the requirement for a CCS CO2 standard is taking place. Dr Arul Murugan, Senior Research
Scientist for Energy Gases at NPL in the UK says that “in some CCS schemes, the idea is to liquify the carbon dioxide either for immediate storage or to enable its transportation by ship to an offshore platform where it will be further processed. Incondensable gases such as nitrogen or methane could reduce the efficiency of this process by increasing the required energy input. Furthermore, these gases do not behave in the same way as CO2
when injected underground and they take up valuable storage space”.
Murugan adds that “in other CCS schemes, the proposal is to compress CO2 to a high pressure so that it can be cost effectively transported in long distance pipelines before being injected into suitable geological structures deep underground. These compressor stations and pipelines are highly valuable assets which must be protected.” If there are combinations of gases in the CO2
, that can
result in corrosion, such as ammonia and moisture or hydrogen sulphide and moisture they may cause irreversible damage to the pipeline or even the storage site itself. This corrosion of the CCS infrastructure would be costly to repair. Corrosion could also pose a safety risk if it went unnoticed and caused a pipeline rupture. In these cases, detection of these trace contaminants is essential to prevent problems escalating.
Process performance and gas distribution asset integrity are not the only reasons for careful analysis and control of CCS CO2
purity. Accurate gas analysis closes the loop
Internationally acclaimed metrological bodies, such as NPL, play a role beyond defining the composition of gas standards for new applications. They also produce high precision gas standard mixture cylinders that contain the required chemical species at the relevant concentrations. These certified gas mixtures can be used to calibrate gas analysers in the field which are in service to measure the CO2
purity.
CCS asset owners need to be sure that their gas storage terminals, compression stations and distribution pipelines will not be attacked by corrosive impurities in the CO2
. Speaking as Head of Product Nitrogen for pharmaceutical packaging
Management for the continuous gas analyser product range within ABB’s Measurement & Analytics business line, Steve Gibbons
Author Contact Details Stephen B. Harrison. sbh4 GmbH • Kranzlstraße 21, 82538 Geretsried, Germany • Tel: +49 (0)8171 24 64 954 • Email:
sbh@sbh4.de • Web:
www.sbh4.de
DRAX Power Station UK
Many nations in may also wish to participate in CCS schemes, but if their country does not have the appropriate geological profile, they must rely on exporting their CO2
. So, for the trade in CO2 for
CCS will inevitably become international. This is a key driver for the development of an international standard for CCS CO2
purity
to ensure a harmonised approach and consistent levels of safety. The standard will also lock in parameters that players in the CCS industry can design around to ensure optimal performance of their equipment.
says that “our LGR-ICOS gas analyser is ideal to monitor trace levels of many gases, such as moisture, oxygen and hydrogen sulphide. Oxygen is a tracer that is used to provide early warning of pipeline leaks. Hydrogen sulphide is toxic and when combined with water, it causes corrosion problems. So, in one instrument we have the capability to address several concerns that these trace impurities raise”. Laser techniques are highly responsive to small concentration changes, so they can rapidly enable mitigating process control interventions to deescalate potential issues before they become major problems.
Operators also want to be sure that the inert gases, which rob power from the gas compressor, are present only at minimal concentrations. Methane and nitrogen are the most common inert gases found in carbon dioxide. Gibbons says that “in some cases, we would recommend a TCD gas analyser, such as the Caldos27 to measure nitrogen or an NDIR analyser like the Uras26 to measure methane. Or, the LGR-ICOS can also be used to measure methane alongside the reactive gases”. In closing, he adds that “our gas analysers have been used for many years to uphold rigorous gas purity standards. For example, the EU and US Pharmacopeia monographs specify that a paramagnetic oxygen analyser must be used for the identification and purity assay of medicinal oxygen. That’s an application where our Magnos28 has been used for decades”.
Green Hydrogen concept
The safety of the personnel operating the CCS equipment and the general public are also of paramount importance. CO2
intended
for CCS may also contain trace levels of highly toxic chemicals such as mercury or hydrogen cyanide. Whilst operators cannot always prevent these molecules being present at tiny levels, they can monitor their concentrations to ensure that they exist in the gas
only in minute traces which would ensure that any potential CO2 leak from the CCS processing equipment or storage site does not pose a health risk. Murugan continues to say that “with all these operational, health and safety considerations in mind, my team at NPL are starting to develop the analytical methods and traceable reference materials required for performing these important purity analyses”.
ABB LGR-ICOS Online Natural Gas Analyser
© copyright ABB
WWW.ENVIROTECH-ONLINE.COM IET ANNUAL BUYERS’ GUIDE 2020/21
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116
