This page contains a Flash digital edition of a book.
30 Air Monitoring Advanced Data Gathering System for ECA Compliance Launched


Parker Kittiwake Procal (UK) has launched the new Procal 1200M data gathering system and control unit, specifically designed for maritime use by marine engineers. In addition to collecting and processing data from Parker Kittiwake Procal’s marine emissions analysers, the Procal 12000M is capable of sending and receiving data from devices which monitor exhaust gas scrubbing systems. This enables the collation and accurate reporting of data from various parameters, including SO2


, CO2 temperature, turbidity, polyaromatichydrocarbon equivalents, and wash water flow rate.


The analysers communicate via a serial data link to the Procal 1200M, which can be located up to 1200m from the exhaust mounted CEMS, and data from up to sixteen channels per exhaust gas scrubbing systems can be presented on an individual front panel. Sealed to IP65 standards and specifically designed to be located in harsh marine environments, the Procal 1200M control unit has the ability to generate detailed and accurate reports, aiding operators in meeting the stringent reporting requirements of today’s environmental


regulations. With three levels of password protection, the unit is also compliant with the security requirements of MARPOL Annex VI.


Spot sampling is becoming increasingly common in the Baltic and North Sea ECAs, and from January 1, 2016 the European Union requires member states to carry out sulphur tests on the marine fuel being used onboard many of the ships calling at their ports. Where mariners are unable to rapidly and effectively demonstrate compliance, even compliant vessels could incur delays.


Chris Daw, business development manager, Parker Kittiwake Procal, commented: “As environmental legislation continues to evolve in parallel with ecological awareness, the policing of compliance is becoming gradually more uniform and effective. Indeed, many Port State Controls, especially those in Europe and the US, are cracking down hard. With the potential for fines and delays, accurately demonstrating compliance is becoming a bottom line issue.”


He continued: “An easy-to-use hub for all scrubber and CEMS related data, the Procal 1200M unit not only provides the crew with essential information, it also aids operators in collating detailed and accurate data for regulators to prove compliance.”


This development follows the recent appointment of Score Subsea and Wellhead Ltd as an official systems integrator. The contract allows Procal to expand upon its existing international distribution and service capability, underpinning both companies’ commitment to support global emissions reduction and improve air quality both at sea and on land.


Control Air Quality with Temperature, Humidity and Carbon Dioxide Monitor


For More Info, email: email:


PPM Technology Ltd (Wales) are specialist in Indoor Air Quality (IAQ) gas detection. One of our most popular IAQ monitoring instrument is the PPMonitor Office Comfort unit: monitoring the three most common IAQ parameters implicated in occupant discomfort: Temperature, Humidity and Carbon Dioxide.


For More Info, email: email:


Carbon Dioxide is generated indoors by people breathing. Elevated CO2


levels are directly related to the number of occupants in a building. Carbon Dioxide levels exceeding 1000ppm can cause occupants to feel sluggish (low productivity). CO2


ventilation. High CO2 not energy efficient.


The ‘PPMonitor Office Comfort can show precise changes in the IAQ parameters over time. The user can control and run the unit from their PC using a wireless USB ZigBee dongle or from a Touch Sceen IAQ monitor. The bespoke PPMonitor software enables the data to be viewed graphically, produce reports, statistical data, run schedules as well as alarm functions.


The blue lines on the graph are actual concentration values and the green lines are Time Weighted Average (TWA) readings. 37479pr@reply-direct.com


For More Info, email: email:


For More Info, email: email:


TOUCH SCREEN


overcrowding or inadequate air ventilation rates. Monitoring CO2


is the most useful indicator of adequate levels indicate problems with


along with Temperature and Humidity can lead to significant energy savings since over-ventilated buildings are 37370pr@reply-direct.com


New Calibration Gas Standards Generator Announced


KIN-TEK (USA) is proud to announce the 491Flex Calibration Gas Standards Generator which is an update of the very popular 491M manual system. The 491Flex uses permeation (or diffusion) tubes as the component compound source for creating very low concentration mixtures.


The 491Flex retains the modular construction and expandability of the 491M, but replaces the analogue controls with the same controls developed for our computer controlled FlexStream system. Accuracy and precision are thus maintained throughout the main product line (FlexStream, new 491Flex, and EcoFlex). Product differences include automation, parameter readability and expandability.


The new 491MFlex uses electronic mass flow control and full PID temperature control.


KIN-TEK Analytical will be exhibiting at Pittcon Booth #4139 and will have the 491Flex Generator for its debut.


New Multi Functional Manometer Offers Simple and Accurate Industrial


For More Info, email: email:


Stack Flow Measurement The new, multifunctional MF Plus Manometer from MRUAir Fair (Germany) offers a simple, yet efficient method of measuring traverse point volumetric flow rates in industrial stacks, compliant to European Standard EN16911-1 and ISO 10780.


For More Info, email: email:


TOUCH SCREEN


This unit can perform simultaneous measurements of differential and barometric pressure and temperature, whilst adjusting to conditions of wet or dry gas. It will also work out current and average data, either with ‘start-stop’, or a preset average time, of up to 10 minutes and calculate absolute or static pressure in the stack, whilst adjusting to compensate for ambient barometric pressure. MF Plus is also capable of automatically calculating point average data for compliance to EN 15259, whilst its intuitive menu allows you to make traverse point flow rate measurements in ducts, stacks and pipes in accordance with EN 16911. MF Plus can calculate up to 100 traverse point measurements in a single stack.


For More Info, email: email:


For More Info, email: email:


5669ad@reply-direct.com IET January / February 2016 www.envirotech-online.com


For More Info, email: email:


For More Info, email: email:


This versatile instrument allows the user to manually input the stack’s cross sectional parameters, such as size, diameter and number of traverse points within the grid. You can also input gas data composition for gas density calculations to create standard/normalised conditions. MF Plus is highly adaptable and fits in with all Pitot tube models and compensates for the Pitot angle and wall effects. The high volume measurement data can be transferred to an SD card in CSV format.


5778ad@reply-direct.com


For More Info, email: email:


For More Info, email: 37087pr@reply-direct.com 37405pr@reply-direct.com , NOx, P H, sea water


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64