26 Air Monitoring Air Quality and Dust Monitor
Unitec (Italy) has further upgraded its field-proven microprocessor-based air quality monitor ETL3000, by adding an optional light scattering particulate module, PM10-LS, and providing the measuring system with new VPN functionalities achieved by means of a multi standard GPRS/EDGE/3G router.
ETL3000 is equipped with up to 5 SENS3000 Plug&Play cells, each one specifically designed for monitoring CO, NO2, C6H6, O3, CH4, NOx, NH3, H2S and SO2. In addition air temperature, relative humidity and noise can be simultaneously measured. SENS3000 is based on thick-film sensors, a solid state technology which takes
advantage of nano-structured Metallic Oxides Semiconductors (MOS technology). PM10-LS module includes pump, inlet head, particulate detector and the pneumatic line. The main microprocessor handles all activities, including data acquisition, data treatment and storage, automatic daily zero calibration and data transmission. Two different cyclones can be fitted at the inlet line, in order to determine PM2,5 or PM10 fractions. ETL3000 is specifically designed for outdoor installations and offers an “Eco-friendly” impact. It can be effectively used, for instance, by local Authorities, Industrial Wastes and Building Yards to monitor air quality at ppb level. ETL3000 provides quality data at an affordable price, requiring low maintenance with a low cost of ownership. Along with the ETL3000, UNITEC S.r.l. portfolio includes following additional instruments, internally designed and all dedicated to the environmental monitoring: LSPM10 and ETL DUST, light scattering dust monitors (PTS, PM1, PM2,5 and PM10); AIRGENIUS, light scattering dust monitor combined with a sequential sampler; OGD3000 multi gas calibrator; AIR3000, zero air generator; MGA, multi gas analyser.
Reader Reply Card No. 73
New Gas Sample Probe Environmental monitoring It’s all connected
The gas sample probes of the JES 301Ex series from JCT (Austria) are used for applications where continuous monitoring is required in hazardous area applications. Operators require safe, robust and low maintenance equipment that is designed to meet a whole range of process applications and meet international safety standards for hazardous area equipment. The new JES 301Ex gas sample probe is a superior product that utilises high quality materials and leading engineering practices to give excellent performance and long service life on virtually every application. Coupled with this high build quality, the JES 301Ex fully meets the requirements of hazardous area equipment legislation and is rated for Zone 1 applications. Meeting II 2 G Ex d IIC T3 / II 2 D Ex tD, A21 IP65 T135°C, II 2 G Ex em II T6/T5/T4, II 2 D Ex tD A21 IP66 T80°C, T95°C. The JES 301Ex probe works by removing particulates from the gas measurement stream and is the primary filtration device for the overall analysis system. It is fully heated to eliminate cold spots that cause filter element blockages due to the build up of wet particulates. The design and location of the internal self limited heater ensures that the probe has no cold spots where condensation can form. The JES 301Ex probe is available with a complete range of options including various probe tubes, filter types and back-purge / calibration port options.
Reader Reply Card No. 75 Reader Reply Card No. 74
CEM Conference Programme Now Available
The order of events for the 10th International Conference and Exhibition on Emissions Monitoring has now been finalised and is available now on
www.cem.uk.com. CEM, the International Conference on Emissions Monitoring, has grown in strength and popularity since its inaugural meeting in 1997. CEM 2011 will continue this position as the major international conference and exhibition specifically designed to cover the subject of source emissions monitoring in its entirety. CEM 2011 will be held in Prague from 5th – 7th October 2011. The conference will feature 5 topical sessions:
1 Legislation and its effects on the industry – are you ready for the industrial emissions directive?
2 Monitoring of particulates and trace species - fine particles are possibly the greatest challenge to many countries at the moment with many EU member states and individual states in the USA facing the fact that they cannot comply with the tightening air quality standards without a better understanding of the speciation
Turnkey System for Gas Emission Monitoring and Process Control (GIGAS CEM SYSTEM)
Reliable and Robust in the Harshest of Environments. Simple to Start up, Operate and Service Large Spectral Library to Identify over 300 Chemical Compounds Conforms to EN 15267, EN 14181 and EN 14956
We are currently looking for selling partners in E.U.
Distributor Enquiries Welcome
3 Remote and diffuse monitoring - as legislation calls for increased accuracy despite decreasing concentrations, advanced techniques offer a solution to this challenge
4 QA/QC - an intricate part of the operation of a CEM program
5 Industrial applications and case studies - just how easy it is to achieve near zero emissions from coal-fired plants?
Via Fiume 16, Angeli di Rosora (AN) Italy Phone: +39 0731 8161 Fax: 0731 814700
Reader Reply Card No. 76
Email:
environment@loccioni.com Web:
www.loccioni.com
The conference programme is only one part of the CEM2011 experience. The posters and extensive exhibition offer delegates the chance to chat and interact with those who may be able to answer the very questions that would solve the challenges they face. The social agenda is designed to maximise the time delegates have free to ask awkward questions, handle equipment and to relax into the extended network of the now well established CEM-community. Where better to do that than in the beautiful historical capital of the Czech Republic? For more information go to
www.cem.uk.com
Reader Reply Card No. 77
IET May / June 2011
www.envirotech-online.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65
