30 Measurement and Testing Rapid and reliable boiling
curve process analyser Bartec Benke’s rapiDist-4 offers rapid, reliable and accurate boiling curve measurements to allow for fast process control of atmospheric distillation columns and blending processes for all types of middle distillates and feedstock for petrochemical processing (naphtha), jet fuels, fuel oils, diesel fuels and similar petroleum products and liquid hydrocarbons.
The rapiDist-4 is capable of taking measurements from IBP to FBP, programming the analyser is relatively simple and the results will correlate with ASTM D86. rapiDist-4 offers an ASTM D86 conform validation, which is optional. The cycle time is only 10 to 15 minutes (for diesel 10 minutes and for gasoline 15 minutes). The core components of this unit, such as the dosing unit, vaporiser, condenser and receiver, also meet the design specifi cations set out by ASTM D86.
The analyser incorporates integrated diagnostic and maintenance features, which include an automatic decoking devise and remote access. rapiDist-4 also features a non-contact and very robust optical level measurement for the dosing and receiver unit.
The highly robust rapiDist-4 is certifi ed to operate in hazardous areas under ATEX, IECEx, CSA C/US, TRCU, among others on request.
More information online:
ilmt.co/PL/pZwoanalyzers-and-analyzer-systems/analyzers-bartec-benke/ rapidist-4-analyzer/
For More Info, email: email:
For More Info, email: email:
46285pr@reply-direct.com “ Cycles of shortage and surplus characterise the entire history of oil. ” — Daniel Yergin
Saving money with TOC analysis
Total organic carbon (TOC) is a measurement parameter for the content of carbon in dissolved and undissolved organic substances in water and therefore an important indicator of water quality in a variety of municipal and industrial applications. In industry, water is used as a heating and cooling medium, operating fl uid or for auxiliary means where any contamination causes high costs. Monitoring the TOC reliably detects organic pollution of process water which often indicates product
leakages, leaking heat-exchangers or equipment failure. For optimised process control it is crucial to maintain product quality, safe operation and costs effi ciency.
Depending on the amount of TOC and the type of water LAR offers a wide range of analysers with application specifi c technology. You can view some of this technology and discuss your TOC analysis requirements at PEFTEC, where LAR will be exhibiting on stand 6.
Waste water monitoring is realised through LAR’s QuickTOCultra and its high temperature combustion, which fully oxidises the complete sample incl. Particles. With special confi guration it even handles high salt and fat contents with low maintenance efforts.
For purifi ed process water monitoring LAR offers the QuickTOCpurity which has a unique loop injection system protecting the sample from ambient air and any contamination. Thus, it allows a special calibration and validation with test gas, combined with our high temperature combustion, resulting in a reliably TOC detection.
The Ralston Field Gauge LC10-TA Thermal Probe
The Ralston Field Gauge LC10-TA Thermal Probe is a battery operated, general purpose digital temperature probe with a wide temperature range of -30 to 150°C (-22 to 302°F) and an accuracy of IEC 60751 Class A (+/- (0.15 +0.002*|t|)°C). Designed as a portable, easy-to-use device, the Field Gauge LC10-TA features a rugged stainless steel probe - a safe and practical alternative to glass thermometers.
With a large display, intuitive controls, a convenient high/low function, and customization options that allow the user to quickly and easily switch from among 4 standard engineering units, the LC10- TA Thermal Probe is an ideal choice for lab personnel, I&E and hydrostatic technicians, and anyone involved in temperature monitoring. It’s well suited for pressure logging during hydrostatic and leak testing,
temperature measurement during pressure calibration in non-hazardous locations, and the general monitoring of temperature wherever live reading and logging is required.
More information online:
ilmt.co/PL/D0LY For More Info, email:
Field Gauge LC10-TA
Digital Probe Thermometer A robust device that measures and displays temperature readings on a large, backlit screen and connects to your PC via USB
email: For More Info, email: email:
•
Log temperature and view live readings on your PC via USB using the included FieldLab Desktop software
•
Increased visibility — large, easy-to-read display with intuitive controls and a bright backlight
•
Exceptional durability — withstands abuse and cracking and is waterproof up to 1 meter (IP67)
•
Convenient High / Low function that allows you to see the highest and lowest temperature reached
•
Temperature accuracy of +/- (0.15 +0.002*|t|)°C (IEC 60751 Class A)
• Wide temperature range of -30 to 150°C • Certified to CSA Standard 22.2 61010-1
50578pr@reply-direct.com
The QuickTOCtrace detects the TOC via UV oxidation and conductivity measurement and therefore is specially suited for the monitoring of ultra pure water. It is characterised by an extremely fast response time and based on it is design it easily integrated in existing processes.
More information online:
ilmt.co/PL/pZlo For More Info, email:
New calibration laboratory brochure published
email: For More Info, email: email:
Fox Thermal have recently announced the release of a new brochure titled ‘Fox Thermal Facility and Calibration Laboratory Capabilities’. This document describes the importance of actual gas calibrations for gas fl ow measurement instrument accuracy.
Several important advancements in calibration and fl ow measurement technology were conceived by the engineering team in the state- of-the-art calibration facility at Fox Thermal: accuracy specifi cation that exceeds regulation requirements for monitoring devices, in-situ calibration validation for mandated verifi cation of device calibration and the Gas-SelectX®
gas
selection tool for fi eld-selectable gases/gas mixes without re-calibration at the factory.
Fox Thermal manufactures thermal mass fl ow meters commonly used to provide highly accurate gas fl ow measurement for industrial and oil and gas applications. Fox Thermal meters, in these applications, perform direct mass fl ow measurement at very low fl ow rates with a superb turndown for upset conditions (up to 1000:1). They are easy to install – insertion and inline styles available and have a rugged, low-maintenance design, available with remote sensors
Visit
ralstoninst.com/pinLC10TA or scan the QR code to find out more +1-440-564-1430 | (US/CA) 800-347-6575
ISO 9001:2015 Certified Made in the U.S.A.
Fox thermal mass fl ow meters provide the real- time measurement required for sophisticated combustion control systems, as well as other critical fl ow measurement applications. These include compressed air monitoring, wastewater aeration, hydrogen monitoring, landfi ll gas monitoring, purge monitoring, and the measurement of fl are, combustor, vent and natural gases.
More information online:
ilmt.co/PL/g0XP For More Info, email:
OCTOBER / NOVEMBER •
WWW.PETRO-ONLINE.COM
email: For More Info, email: email:
49487pr@reply-direct.com
48986pr@reply-direct.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52
