Analytical Instrumentation Fully automated system for comprehensive water analysis
The complete range of ions typically present in water can now be determined fully automatically with TitrIC flex, the new system from Metrohm for comprehensive water analysis. To this end, TitrIC flex combines titration, direct measurement, and ion chromatography. Results from all three methods are collected in a common database and edited in a shared report.
For maximum efficiency, titration and ion chromatography are performed in parallel. TitrIC flex is completely automated integrating an OMNIS Sample Robot. This modular autosampler can be expanded step by step to accommodate up to 175 samples, which are determined completely unattended. The samples are automatically filtered in order to protect the IC from contamination with particles. Physical parameters such as turbidity and colour index can also be integrated at any time.
TitrIC flex is self-monitoring. Users are automatically informed when calibration of the electrode or determination of the titre should be carried out to ensure reliable and reproducible results. Likewise, check standards are automatically injected after any defined number of samples. The system is automatically recalibrated if the check is out of specification.
The following parameters can be automatically monitored using TitrIC flex (TitrIC flex II for anions and cations): pH value; temperature; conductivity; p and m value; hardness (calcium/magnesium); cations (e.g., lithium, sodium, ammonium, calcium); anions (
e.gl, fluoride, chloride, bromide, nitrite, nitrate, phosphate); Ionic balance.
More information online:
ilmt.co/PL/5kDL For More Info, email:
Koehler Instrument Company, Inc. is excited to announce their newly designed K95300 Low Temperature Flow Tester. This tester has been developed for analysing lubricating greases in low temperature environments. The test is performed in accordance with DIN 51805 (Kesternich) and is also customisable.
email: For More Info, email: email:
The low temperature flow test is an instrument used to determine the flow of pressure of lubricating grease at temperatures as low as -50°C. Due to the unique design of the cooling system, this versatile instrument can cool down in high speed and reach temperatures of -50°C without needing a costly external cooling implement. The core components are in accordance with medical standards to ensure optimal precision and reliability even in very low-pressure ranges. The user-friendly touch screen interface aids in operating and usage of the machine in an expedient and professional manner.
The measurement principle utilises a layer of grease to be tested which is placed on a glass plate devoid of air bubbles. The measuring nozzle is then simply pressed a couple of times onto the layer of lubrication grease until it is filled with grease. The nozzle is then inserted into the thermostatically controlled metal block of the tester and the chamber is air sealed and thermally isolated to ensure the best possible performance. Following the preparation time, the pressure above the sample nozzle is subsequently elevated in increments until a sudden pressure decrease is observed; from this it will be inferred that the grease is pressed through the nozzle. The test is stopped, and the last pressure value is displayed as the flow pressure according to Kesternich. In addition, the grease removal container is installed under the tester and is easy to clean and replace.
Specifications include the following: Conforms to the specifications of DIN 51805; pressure range is 0 to 3.000 mBar; pressure resolution of <1 mBar; temperature range is ambient to -50°C; temperature resolution is <1°C; Touch PLC; internal generated air pressure; Ethernet interface; voltage of 110-230V/ 50- 60Hz; power is 350 W max.
Software features include the following: A touch screen with integrated PLC which controls the system and facilitates easy adjustment of test parameters and quick setups. Some of the primary functions include the following: pre-defined pressure settings according to DIN 51805, customised setup is possible; pre-defined selection of the most used temperatures of free selection is also feasible; pre-defined increase of time of 30 s or custom; user selectable starting pressure; help function directly embedded in the HMI; remote monitoring / control via app.
Accessories consist of the basic machine, multi-range power supply, PLC and HMI Software, 1 testing sleeve, 3 unloading containers, a tooling set and documentation. The dimensions are (HxWxD) 230 x 320 x 440 mm (9 x 12.6 x 17.3 in.) and the weight: 25 kg (55 lbs).
More information online:
ilmt.co/PL/ODlD For More Info, email:
email: For More Info, email: email:
50645pr@reply-direct.com OCTOBER / NOVEMBER •
WWW.PETRO-ONLINE.COM
50392pr@reply-direct.com ArabLabCyanA4OL_1603 Arab Lab A4 ad_2018_F 26/02/2019 18:47 Page 1
New low temperature grease flow tester
9
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52
