PRODUCT SHOWCASE - ON THE SHELF Stock items available immediately


Tempmaster PRO laboratory standard, precision digital thermometer / logger for Pt100 sensors


The new Tempmaster PRO from Labfacility provides very high precision temperature measurement with Pt100 sensors. Data can be displayed in oC,oF, K or Ω as required; nine front panel push keys, the only user controls, are used in conjunction with the large, clear display screen. There are two input ports for 3 or 4 wire Pt100 sensors; the instrument


automatically recognises 3 or 4 wire configurations. Both inputs can be scanned and values logged according to parameters set up by the user in the PC software. A real-time clock and on-board memory are incorporated. A flash drive USB port is provided to allow data to be stored and/or


exported. Firmware updates are also facilitated via this port. The PC software which is supplied with the Tempmaster PRO


allows remote control, measure and logging. Serial interface with the PC is via a USB connection.


Labfacility L200 USB digital thermometer / data logger


The Labfacility L200, thermocouple and Pt100 thermometer can be used in conjunction with a PC to provide accurate, versatile 8 channel temperature measurement, scanning and logging of measured values. It can also be used as a “stand alone” 8-channel indicator/logger and incorporates a digital display of measured temperature. The in-built, self-calibration facility is a rapid and convenient method for on-site


calibration and does not require any additional equipment other than a special, external link for thermocouple ranges or two special, close-tolerance resistors for Pt100. The L200 is designed to provide exceptional stability with high measurement


resolution and represents an ideal crossover between plant practicality and laboratory performance at a very competitive price. The PC software supplied with the instrument allows control, measure, logging


and calibration functions. The eight thermocouple input channels accept types J,K,T,E,N,R,S & B: highly


stable, automatic cold junction compensation is incorporated. The Pt100 version accepts 3-wire sensors with up to 100m leads. Display resolution for thermocouples is 0.1oC on the front panel readout and


0.01oC in the PC software control panel; Pt100 ranges are displayed with 0.01 resolution. The integral, backlit LCD display can indicate selected channels or automatically scroll through all inputs. The measured temperature can be displayed in degrees C or F. Communications are provided via a USB port. The L200 is CE marked, RoHS compliant and has a two year warranty.


Labcal PRO laboratory standard, precision digital thermometer / logger


The Labcal PRO from Labfacility is fully characterised for Pt100 sensors and all major thermocouples J,K,N,T,E,R,S and B. Exceptionally stable automatic cold junction compensation with a rejection of 100:1 is incorporated for thermocouple ranges. Data can be displayed in oC,oF, K, Ω or mV as required. nine front panel push keys,


the only user controls, are used in conjunction with the display screenThere are four input ports, two for thermocouples and two for 3 or 4 wire Pt100 sensors; the instrument automatically recognises 3 or 4 wire configurations. The Labcal PRO can accept two Pt100 sensors and/or two thermocouples of similar


or different types (J,K,N,T,E,R,S and B). The measured temperature can be displayed directly from one of the inputs or differentially between similar or different inputs. Differential temperature and the two individual channel temperatures are displayed simultaneously. The PC software which is supplied with the Labcal PRO allows remote control, measure and logging. Serial interface with the PC is via a USB connection.


Labfacility Ltd 38 u Bognor Regis 01243 871280 OCTOBER 2015 | INSTRUMENTATION u Sheffield: 01909 569446


Labfacility L300 8 channel digital thermometer/logger/ alarm/on-off controller


The new L300 multi-function temperature monitor from Labfacility provides 8-channel measurement and logging with 8 relay outputs for alarm or control switching. The 8 independent relay outputs are fully configurable for total versatility


and provide 10A/ 250V changeover contacts. Output modes include high, low and band alarm and on-off control. Hysteresis and band values are user set. The l300 can be used in conjunction with a PC to provide accurate,


versatile 8 channel temperature measurement, scanning and logging of measured values. It can also be used as a “stand alone” 8-channel indicator / logger and incorporates a digital display of measured temperature. The L300 is designed to provide exceptional stability with high


measurement resolution and represents an ideal crossover between plant practicality and laboratory performance at a very competitive price. The PC software supplied with the instrument allows control, measure,


charting, logging and calibration functions in addition to relay configuration. The eight input channels accept thermocouples type J,K,T,E,N,R ,S & B or


Pt100 2 or 3 wire sensors; the thermocouple version incorporates highly stable , automatic cold junction compensation. The L300 is CE marked, RoHS compliant and has a two year warranty.


u E-mail: info@labfacility.com u Web: www.labfacility.com /INSTRUMENTATION


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44