ADVERTORIAL SENSORS & TRANSDUCERS
Very small pressure pulses are no problem for new sensor
he new Type 601C miniature pressure sensor from Kistler Instruments (
www.kistler.com), available in both charge output and voltage (IEPE) output types, is ideally suited to a wide variety of dynamic pressure measurement applications.
T The high
sensitivity of the unique PiezoStar® crystal developed by Kistler, much higher than that possible with quartz, allows small pressure fluctuations which are superimposed on static pressures to be measured with exceptional resolution. In addition to the high sensitivity and small size, the charge output version has an extremely wide operating temperature range from -196 to + 350°C at pressures up to 250 bar. The 601C also benefits for a high natural frequency (>215kHz),
Sensors. The high-performance sensor measures temperatures within a range of -25 to 350° C on the basis of infrared radiation emitted by the object, regardless of the material it’s made of and its state of aggregation. And thus wenglor is once again demonstrating innovative market competence in the area of optical sensor technology. The measurement of infrared radiation is quick and contactless, and the object itself is not influenced in any way. The temperature of a great variety of objects can thus be reliably measured, regardless of the material they’re made from and their state of aggregation. The sensor measures temperature with a spectral sensitivity of 8 to 14 m within a measuring range of -25 to 350°C. The measured value appears at the integrated, intuitively operable display and is read out via the outputs or the RS-232 port. Thanks to its two switching outputs and an analog output, the sensor is suited for various measuring applications, for example target versus actual value comparison and absolute measurement.
From Ice Cold to Burning Hot A
wenglor sensoric ltd 01536 313580
www.wenglor.com
WTS Wireless Inclinometer System T
making it an ideal solution for applications with dynamic pressure events. The diaphragm design is optimised for applications where the pressure measurement is simultaneously accompanied by high temperature transients such as in testing of closed vessels, airbags, pyrotechnics etc.
Kistler Instruments Ltd 01256 741550
www.kistler.com
Pressure Sensor P
ressure Sensor with frequency response faster than a humming bird’s wing. KELLER is setting new standards with the new Series M5. New KELLER M5 series pressure transducer for applications with engine test benches, wind tunnels, or turbine blade tests.
• Excellent dynamic response up to 50 kHz (pulsating measurements) • Insensitive to shock and vibration • Sensor head capable of exposure to 200°C • Extremely compact design, pressure connection: M5 x 0.5 fine thread
• Teflon FEP cable with IP67 ferrule which is suitable for use on test benches • Pressure ranges of 3 bar, 10 bar and 30 bar
The KELLER M5 series is a thermally
ultra-robust pressure transducer capable of supporting high-precision static and dynamic measurements. It has an M5 connection thread and a remote pressure sensor. The pressure senor does not contain any oil, sealant or adhesive in contact with the media, which is ideal for taking highly dynamic measurements at close proximity.
Interested? Log on to our website and find out all of the information you need to know, download the datasheet –
www.keller-druck.com
KELLER (UK) Ltd 0845 643 2855
sales@keller-pressure.co.uk
www.keller-druck.com
32 OCTOBER 2015 | INSTRUMENTATION New range of
Hipot and Insulation Resistance testers
elonic Instruments have introduced a new range of Hipot (Flash) and Insulation Resistance testers manufactured by Japan based Kikusui. Designated the TOS5300 the three models in the range are designed for use in Withstanding Voltage and Insulation Resistance testing to help ensure the safety of Electrical / Electronic components / equipment. Incorporating and innovative PWM amplifier that achieves high stability and has an input voltage regulation of.3%. The series offer rise and fall time control of the test voltage and a stable output which is unaffected by mains voltage variations, plus the ability to select 50 or 60Hz test frequency. Upper and lower current limits can be set within the range of 0.01mA to 110mA in AC mode and 0.01mA to 11mA in DC mode. AC test voltage is settable from 0.05kV to 5kV. D.C test voltages can be varied from 0 to 6kV. All models will operate from any global AC input voltages and frequencies; and are equipped with a USB interface. Also available for hire.
T
Telonic Instruments Ltd 0118 9786911
www.telonic.co.uk
/INSTRUMENTATION
s of the end of September, the new Temperature Sensor OptoTemp has expanded wenglor’s product portfolio in the field of Photoelectronic
he WTS Wireless Tilt System is a flexible, IP-67 rated radio telemetry system designed to provide high accuracy remote angle measurement at distances of up to 100M. WTS allows users to record and log data remotely without the cost and impracticality of traditional wired methods. The heart of the system is the WTS Wireless Inclinometer; a high-accuracy, robust instrument utilising MEMS technology and powered by rechargeable batteries with an exceptional (typically) 180 days between charges. The WTS connects remotely to a base station and uses either a PC and / or a handheld data acquisition module to manage the devices and display the results. Both the base station, handheld device and PC software can be included as part of the WTS system.
Sherborne Sensors +44 870 444 0728
sales@sherbornesensors.com
www.sherbornesensors.com e-store:
www.b2b-sherbornesensors.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44