Frank Powell
Grinding Products Manager Marposs Corp. Auburn Hills, MI
www.marposs.com
QualityScan S
o, your shiny new, state-of-the-art metrology system is up and running. What’s next on the agenda? Well, after you relax for a minute and admire your handiwork, starting some serious, in-depth planning for its replacement is probably not a bad idea. No, there is nothing wrong with today’s hardware and software, and your shiny new system will probably last for many years. But, it absolutely won’t last forever and when the time comes to repair or replace it you may be in for an unpleasant surprise. Metrology, like all technologies, is evolving rapidly and continuously.
That’s why your new system is a lot more capable than anything you could buy a few years ago. Your tolerances are tighter, you need more flexibility, you can’t find skilled operators so you need more capabilities in the soft- ware and a simplified interface—all of these evolving requirements are reflected in the components of your system. Your needs will be different in a few years, and so will the systems available to meet them. The parts you need to keep the old one running, however, may not be available. In fact, some basic building blocks of today’s widely-used systems, like Intel 486 processors, component-mount transistors and some specialized chips are already in short supply. Other things, like gas-plasma displays are now listed as environmental hazards that can’t be used at all, even in a like-for-like replacement. And, even if a manufacturer can find legacy components, in many
places it’s already illegal to use them in commercial products. They often contain lead and other heavy metals for which voluntary reduction or elimination is being replaced with strict bans in many places and the list is growing rapidly.
There is no question that the time is rapidly approaching when manu- facturers simply will not be allowed to produce many of the components and apparatus you are using today. Don’t wait for a crisis; you need to start planning now to avoid unpleasant surprises tomorrow. A good place to start is with an inventory of everything that’s on your
floor now. Talk to your suppliers about the status of key components, with particular attention to the electronic items that have the highest incidence of obsolescence. Let your suppliers know that you expect to get ample advance warning about anything that is going to be unavailable. That way
14
ManufacturingEngineeringMedia.com | August 2014
The Time to Start Planning for Obsolescence is Now
you can make decisions about whether to repair or replace components or systems now, or to stock up on key parts that may not be available when needed in the future.
Barring crashes or catastrophic damage, any piece of metrology gear from a reputable supplier ought to deliver 10–15 years of service with routine maintenance. That’s a reasonable number to use as a base for prioritizing your spare-part requirements and replacement schedule. It’s obvious, but nonetheless worth mentioning, that the older a system or component is, the less likely parts or direct replacements are to be available. In other words, prioritize your plan to deal with your oldest com- ponents first because that’s where failure is both most likely to happen, and most likely to cause the greatest disruption.
Prioritize your plan to deal with your oldest components first because that’s where failure is most likely to happen.
And, if you do decide to replace an old system, don’t throw it away. You can often cannibalize it for parts to keep some other system running while you’re waiting for an upgrade or replacement. It’s not a perfect answer, but it’s a lot better than losing production or making bad parts because the metrology system is down.
Beyond keeping you informed about products that are reaching the end of their life, your suppliers should be doing what they can to help ease the transition from old to new. For example, about 92% of the electronic products produced by Marposs are pin-for-pin compatible with their legacy predecessors. We also endeavor to provide logical upgrade paths. For example, the current P3UP and P7UP amplifiers are pin-for-pin compatible with the older machine interfaces they replace.
The same thing is true of many of the mechanical features such as mounting arrangements and hole spacing on our mechanical components. The Marposs Web site even has a section devoted to upgrades to help smooth the process.
Obsolescence is a fact of life. You need to plan for it now, and so do your suppliers. Don’t wait for a crisis to find out why you should have. ME
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138 |
Page 139 |
Page 140 |
Page 141 |
Page 142 |
Page 143 |
Page 144 |
Page 145 |
Page 146 |
Page 147 |
Page 148 |
Page 149 |
Page 150 |
Page 151 |
Page 152 |
Page 153 |
Page 154 |
Page 155 |
Page 156 |
Page 157 |
Page 158 |
Page 159 |
Page 160 |
Page 161 |
Page 162 |
Page 163 |
Page 164 |
Page 165 |
Page 166 |
Page 167 |
Page 168 |
Page 169 |
Page 170 |
Page 171 |
Page 172 |
Page 173 |
Page 174 |
Page 175 |
Page 176 |
Page 177 |
Page 178 |
Page 179 |
Page 180 |
Page 181 |
Page 182 |
Page 183 |
Page 184 |
Page 185 |
Page 186 |
Page 187 |
Page 188 |
Page 189 |
Page 190 |
Page 191 |
Page 192 |
Page 193 |
Page 194 |
Page 195 |
Page 196 |
Page 197 |
Page 198 |
Page 199 |
Page 200 |
Page 201 |
Page 202 |
Page 203 |
Page 204 |
Page 205 |
Page 206 |
Page 207 |
Page 208 |
Page 209 |
Page 210 |
Page 211 |
Page 212 |
Page 213 |
Page 214 |
Page 215 |
Page 216 |
Page 217 |
Page 218 |
Page 219 |
Page 220 |
Page 221 |
Page 222 |
Page 223 |
Page 224 |
Page 225 |
Page 226 |
Page 227 |
Page 228 |
Page 229 |
Page 230 |
Page 231 |
Page 232 |
Page 233 |
Page 234 |
Page 235 |
Page 236 |
Page 237 |
Page 238 |
Page 239 |
Page 240 |
Page 241 |
Page 242 |
Page 243 |
Page 244 |
Page 245 |
Page 246 |
Page 247 |
Page 248 |
Page 249 |
Page 250 |
Page 251 |
Page 252 |
Page 253 |
Page 254 |
Page 255 |
Page 256 |
Page 257 |
Page 258 |
Page 259 |
Page 260 |
Page 261 |
Page 262 |
Page 263 |
Page 264 |
Page 265 |
Page 266 |
Page 267 |
Page 268 |
Page 269 |
Page 270 |
Page 271 |
Page 272 |
Page 273 |
Page 274 |
Page 275 |
Page 276