CONVEYING In-line Sampling System NDC Infrared Engineering’s improved
PowderVision sampling system allows moisture to be measured in powders, granules and flakes flowing in enclosed ducts or gravity fed conveying systems. PowderVision can be used with a wide range of industrial powders, including chemicals, minerals, detergents and ceramics.
Designed to work with an NDC 710e NIR Moisture or Multi-component Gauge, PowderVision collects samples every few seconds, with measurement values output via digital or analogue connectivity to a PLC or SCADA system for process control.
PowderVision consists of a tube-mounted sampling cup made from 316 stainless steel which slides into a collar that is permanently welded into the appropriate duct in the process. PowderVision is optically coupled to the 710e NIR gauge via a sapphire window. The cup collects sample as it flows through the duct, allowing moisture and other measurements to be made simultaneously. When the measurement is complete, the cup is emptied using a powerful jet of compressed air and the next sampling sequence begins.
Making continual on-line moisture measurements eliminates the need to send samples away for laboratory measurement and allows drying processes to be controlled automatically, helping users to achieve consistent product quality, as well as creating opportunity for increased product yield and reduced fossil fuel consumption through process optimisation. User-configurable software in the 710e HMI provides control of the
PowderVision’s sampling timing sequences according to the required sample collection rate, and the Gauge’s measurements are automatically synchronised with the filling and emptying cycle. The gauge reading is then held until the sampling process has been repeated.
www.ndcinfrared.com
Up, down and around
For clean, safe, cost effective and dust free bulk handling of products turn to UniTrak Powderflight’s range of reliable equipment:
Bucket elevators Aeromechanical conveyors Flexible screw conveyors Bulk bag dischargers
UniTrak Powderflight always moving in the right direction!
Featured product: Powderflight Aeromechanical Conveyor
Trust the experts.
(0)1457 865038
www.unitrak.co.uk
Double flap valves
Rotary valves
Slide valves
Atex approved
Ibis Intergrid Ltd. Materials Handling Engineers
Suppliers, manufacturers & distributors of bulk handling equipment worldwide for 25 years
Tel: 01539 731900
Fax: 01539 731910 Email:
sales@ibis-int.co.uk Web:
www.ibis-int.co.uk
Loading chutes Area Sales Agents Required Bulk Solids Today 33 Screw conveyors
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48