BULK MATERIALS HANDLING
JDN hoists make light work of loads whatever the working conditions
Injuries within workplace environments can occur when personnel are lifting or moving inappropriately heavy loads. The use of mechanical lifting equipment helps, but can also be time consuming, particularly where rope or chain wheel manual operations are associated with raising loads to above head height. Air powered lifting has been proved to be safe, effective, economical and time saving, particularly where there is an existing compressed-air power source available. The J D Neuhaus company have a world renowned reputation for the supply of high performance air operated handling equipment, to operate in the toughest environments for individual loads up to 100 tonnes. However, they are also able to supply air hoists designed for operating in light to medium engineering and general workshop applications. These products ensure workshop health and safety compliance for load capacities up to 2 tonnes, with hoists that have been manufactured to the same high standards as their heavier duty equipment. Two ranges of these general lower duty hoists are available, including the JDN Mini series with models available for payload ratings of 125, 250, 500 and 980kg. These are aluminium bodied units which provide optional lift heights of 3, 5 and 8 metres with a 6 bar air supply. These hoists are also
equipped with a single top suspension hook, which can be used with an optional trolley mounting providing overhead rail suspension to accommodate manual powered traverse movements of suspended loads. A manipulator unit is also available in this versatile Mini range, which provides both safe and efficient single handed operation of lift, lower, traverse and load positioning operations.
Where more rugged, steel-bodied hoists are required, the JDN Profi TI series incorporates four models in a lower-load range rated at 250, 500 and 1000kg plus a 2 tonne lift capacity unit. These models also provide single suspension hook mounting with three optional trolley mounts available to provide manual, reel chain on motorised traverse movements. These products are supplied as standard with 3 metre lift heights, operating from optional 4 or 6 bar air supplies.
Where single hook suspension mounting is utilised for any of the JDN hoists, then both oblique or horizontal pulling facilities can be utilised.
All of these JDN products incorporate high performance grease providing permanent lubrication for the patented vane motor design and planetary gearbox which ensures fail-safe starting with low maintenance and lube-free operation. This is complemented with a patented wear-resistant motor braking system
for 100% duty rating and the elimination of downtime. The pendant control units supplied with these hoists provide sensitive, infinitely
variable speed control for the precise positioning of loads. Filtered or piped air exhaust systems can be supplied, together with appropriate alternative grease lubricant for hoist operations within food-grade related areas. The low-headroom hoist designs combine strength with fast, silent and reliable operation, even for operation within hazardous environments including dusty, dirty or even potentially explosive atmospheres, and at temperatures from -20°C to +70°C. They are also manufactured to comply with ATEX ratings of Ex II 3 GD IIA T4 for the Mini hoist series and Ex II 2 GD IIA T4 / II 3 GD IIB T4 for the Profi TI range. Spark resistant upgrades are also available for the Profi TI range to achieve ratings of Ex II 2 GD IIB T4 or Ex II 2 GD IIC T4 for explosion group IIC. Tel: 01224 722751 Email:
info@jdneuhaus.co.uk www.jdngroup.com
Terex® Finlay launching NEW Terex® Finlay 684 – 2 deck tracked mobile inclined screen
The new Terex® Finlay 684 is a highly versatile and adaptable machine engineered and built for working in quarrying, mining, construction and demolition debris, topsoil, recycling, sand, gravel, coal and aggregate applications. The Terex® Finlay 684 is a compact easily
transportable machine that offers operators rapid set up and tear down times. The new screenbox on the Finlay 684 features two full size 4.3m x 1.7m (14’x5’7”) inclined decks providing efficient screening and high capacity. The screenbox features quick wedge tensioning, access holes and bottom deck
hydraulic tensioning system to reduce time required for mesh changes. All three discharge conveyors hydraulically fold for transport providing the operator with rapid set up and tear down times.
A high performance 1050mm (42”) variable speed belt feeder, with hydraulic gearbox drive, is fitted to the machine as standard and has proven performance and versatility in demanding and varied working environments. The hopper has a 8m³ (10.50yd³) capacity as standard and can be fitted with a 14ft tipping grid or 12ft vibrating grid. This fully self-contained plant can be hydraulically folded and ready for transport in less than 30 minutes making it the ideal machine for contract screening.
Key Features: • NEW double deck 4.3m x 1.7m (14’ x 5’ 7”) screen with full catwalk access.
• Maximum utilisation of the two 4.3m x 1.7m (14’ x 5’ 7”) decks provides ultra- efficient screening capabilities even at small aggregate sizes.
• A combination of quick wedge tensioning on the top deck, convenient access holes and hydraulic tensioning on the bottom deck ensure mesh set up and change out times are kept to an absolute minimum.
www.terex.com
20 Bulk Solids Today
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48