EN175301-803 (DIN 43650) SOLENOID CONNECT
EN175301-803 (DIN 43650) SOLENOID CONNECTORS
EN175301-803 (DIN 43650)
EN175301-803 (DIN 43650) SOLENOID CONNECT
EN175301-803 (DIN 43650) SOLENOID CONNECTORS ATEXAT X TE
Industry standard, 2 and 3 contact, panel and cable mounting, vibration proof, gasket-sealed screw lock connectors; IP 65 sealable Forms A, B and C with 18 mm, 10 mm, and 8 mm contact separations, respectively . Their black, grey or transparent body mouldings are suitable for ambient temperatures from -40 to + 125ºC and the screw type; snap- inserted, silver plated contacts are rated at 10 Amps. Right angled cable-mount models are available, with rewirable or overmoulded cable options in PVC and Polyurethane. Sockets
These connectors are ATE
AT X 94/9/CE Approved with a PG9/
PG1 1 cable entry and are suitable for use around the extreme conditions found in explosive environments. This mainly applies to gases that may be in the air that have the potential, but not the probability of, becoming explosive.
ENERGY AVY SAVING DIN 43650 CONNECTOR ENERGY SAVING DIN 43650 CONNECTOR
CONEC SUPERSEAL SERIES
EN 175301-803 (previously DIN 43650) A/ISO 4400 - Energy saving square connectors. Reduction of energy consumption inside the valve by 60%, reduction of working temperature of valve/electrovalve, extension of valve life. T boost and temperature reduction customisable
The CONEC Superseal series of over moulded type DT valve connectors is assembled in-house and thus provides optimal protection against applications, low temperatures or in dusty , hot conditions. The DT connector series is designed as cable to cable connection and it is latched and locked via a latch with the mating connector. T o unlock, the latch must be pressed down. Thus a quick and safe IP67 tight connection can be established. Optionally the over moulded DT connector series comes with an LED to indicate the signal status and protection circuit. A unique feature is the 360° visibility of the LED. The protection circuit keeps switching and interference voltage away from the LED and connected systems. DT connectors are intermateable with Deutsch.
o unlo o
SERVO & SENSOR SERVO & RV
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117