IDC / DIN / FLAT CABLE CRIMPING PANCON, NICOMATIC
MAS-CON IDC
• IDC connector system on 0.1” or 0.156” (2.54mm or 3.96mm) pitch • 2 to 36 contacts •Straight and right angled versions • The ideal board-to-board power connector system capable of handling up to 12.5A • PCB mounted male headers •Polarisation & locking options • Female sockets pre-loaded with insulation displacement contacts (reduces installation costs) on a 0.1 or 0.156” pitch and can terminate from 18 to 28 AWG discrete or flat wire cable wires • High temperature version available up to 170°C • Through & end terminations available •Optional snap on covers • Standard & custom assembly tooling available • ISO9001/TS16949
Typical part numbers: MFSS-100-10-C, CE100-F-24-12-C LAT-CON DIN 41651 (IEC 60603-13)
• IDC connector system for round conductor flat cable • 0.1” (2.54mm), 0.787” (2.00mm) or 0.05” (1.27mm) pitch • 6 to 64 position connectors • Patented lateral cable entry for faster termination and reduced scrap rates • The same connector can be used for either through or end terminations • Unique latching system enables the latched header to mate with a socket with or without strain relief • Full line of accessories available • Ribbon cable or discrete wire capability • Gold or tin plating finishes • ISO9001/TS16949
Typical part number: 050 020 133A
HI-CON DIN 41612 (IEC 60603-2) • 0.1” (2.54mm) or 0.2” (5.08mm) pitch
• B, 1/2B, C, 1/2C, C+1, D, E, F male-female, dual wipe contact • Custom capability
• Wide range of termination lengths & methods • Contact performance level 2, 400 mating cycles • High performance CuSn contact • Male and female connectors can have mounting clips • Interchangeable with other DIN 41612 products • RTF female version • ISO9001/TS16949
Typical part number: 100 064 452 CRIMPFLEX CONNECTORS AND CABLES
• Crimping of the contacts is obtained by piercing the conductor in 6 points • Copper conductors, silver or carbon ink printed conductors, EL lamps • All types of flexible circuits whose thickness ranges from 75 μ to 350 μ (0.003’ to 0.014’) • Can pierce all kinds of supports: polyester, FR4, polyimide, PTFE, etc. • Mass termination of all contacts in one press stroke which saves time and allows more accuracy
• Connectors operating temperature -55°C to +150°C • Withstanding voltage 1100V rms
• Current rating per contact 3A continuous (DC) or 5A Continuous (AC) Typical part number: 254PW10E0060-S1F57B
22
LANE ELECTRONICS - Sales Office Tel: 01403 790661 - Fax: 01403 790849 - E-mail:
sales@fclane.com www.fclane.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117