Fire
Enquire:
www.dcep.co.uk Tel: 01630 673000 Fax: 01630 673247 Email:
dce@directcontact.demon.co.uk Post: use the Enquiry Sheet Smoke alarms just got even better - introducing the FireAngel WST-630T
Complete Protection Each WST-630T can be interlinked into a single network of up to 50 alarms for complete protection. The network communicates by continuously sending and receiving wireless signals, otherwise known as a ‘meshed network’.
When one alarm detects smoke the wireless module inside sends a radio frequency signal to all the connected alarms ensuring fast response times across the network.
Fast reaction
A 10-year, sealed for life battery, wireless interlink capability with up to 50 units on a network and groundbreaking ‘Thermoptek™’ technology inside are just some of the unique features the latest FireAngel WST-630T smoke alarm offers.
Providing the ultimate protection of Grade F installations, this pioneering product provides an enhanced level of protection than that of conventional battery alarms. Easy to fit and use WST-630T has been designed to give residents the ultimate protection against fire in their home.
Certified to EN 14604:2005, the WST-630T is the very first 10-year sealed for life battery unit to feature Thermoptek™ technology and have wireless interlink capability.
Save time and money on site
The wireless interlink is really straight forward to operate and a ‘2-touch’ system allows alarm units to be linked together in a matter of seconds.
Quick to link and easy to install, the low cost WST-630T eliminates the need to lift floorboards and carpets or channel out walls in order to run long interconnecting wires around the home, thereby minimising disruption and mess.
This system is ideal for larger properties or premises where there are adjoining outbuildings and is particularly useful in premises hampered by concrete ceilings or in listed properties which don’t allow for alterations to the fabric of the building.
Thermoptek™ technology combines the very latest in optical sensing with thermal enhancement, providing fast reaction to both slow smouldering and fast flaming fires in a single alarm. The technology constantly monitors for temperature changes and if a rate of temperature rise is detected the sensitivity of the alarm is increased, providing a quicker response time for both fire types.
This technology completely removes the confusion between fitting ionisation or optical technology around a home, making the initial specification and purchase choice a much easier one. Thermoptek™ is significantly less likely to produce nuisance alarms, which is so often the reason for people disabling detectors.
In the event of an alarm being activated, the ‘intelligent silence’ feature (enabled by pressing the test/reset button on any alarm in the network) will silence all but the initiating alarm.
Additional features of the WST-630T Sealed for life 10 year sensor and power pack, no need to ever replace the battery; Easy to use large concave central test button; Environmentally friendly; Fast reaction to both slow smouldering and fast flaming fires; Easily recyclable; Will operate up to 200 metres in open air; Network can be retrospectively upgraded to add additional alarms; Radio transmitter and receiver in each alarm; ‘Intelligent silence’ (locate function) means pressing the test/reset button on any alarm in the network will silence all but the initiating alarm; Affordable technology; 5 year warranty; BS EN 14604: 2005
With its head office in Coventry, UK, Sprue is Europe’s leading home safety products supplier and manufactures one of the world’s smallest carbon monoxide sensors for use in carbon monoxide alarms. Sprue designs and sells smoke and carbon monoxide alarms including other safety related products throughout Europe under the FireAngel, First Alert, BRK and Dicon brands.
Reader Enquiry: 67
www.sprue.com 02476 323232
Available online now at
www.fastrackcad.com The one stop CAD drawings website. FREE and easy to use Join the 47,300 who already use us
Over 35,000 drawings online now Drawings are available in AutoCAD .DWG format, and the database now includes some 3D models and BIM files.
All ready for instant download into your project plans. For those non CAD users who wish to access ‘view only’ drawings for their information content there is a fast access ‘Preview and print’ facility available in standard .PDF format.
Our unique website allows you to quickly download accurate CAD drawings from a comprehensive range of top building component manufacturers including: Jeld-Wen, Forticrete, Ideal Standard, Marley, Sika, Rockwool, Cembrit, Swish, Technal and many others.
Visit our website to view the popular digital turnpage Portfolio. Why not add the link to your favourites for future reference?
40
Reader Enquiry: 68
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52