Looking after bottom blades - how the correct angles and surgical sharpness can help you achieve a superior quality of cut.
By Ben Taylor, Technical Training Manager, Bernhard and Company
Blade Runner
n terms of cylinder mower maintenance, the bottom blade often gets overlooked. Bottom blades take a lot of abuse in the cutting process - they have cylinders blades smacking against them at a high velocity, they run over sand and turf, hit debris, and are dragged across various surfaces. However, spending a little more time
I
and attention on your bottom blades could reap serious benefits for your facility in terms of quality of cut and replacement parts. Regular bottom blade inspection is crucial to having consistent, predictable performance from your mowers. If your bottom blades aren’t ‘spot on’, could you expect your turf surface to exhibit any sort of consistency?
always grow perfectly straight up. It grows ‘up’ but, generally, in several different directions. As a mower moves across turf, the front face angle of a bottom blade pushes grass blade tips straight up to be cut by the revolving cylinder blade. At this point, with a sharp cylinder blade, grass blade tips that have been presented by the front face angle of the bottom blade will be scythed off. This correct angle on the front face is
always negative (generally around -5 to -7 degrees for greens mowers). If the angle is wrong (i.e. a positive or neutral angle), as the mower moves along the grass, the front face can actually push the grass blade tips over (or lay them down) away from the revolving cylinder blade so they won’t be cut. This is commonly referred to as ‘ragging’, as the turf surface can look ragged from inconsistent cutting. Another common occurrence from the wrong angle being ground on the bottom blade is the appearance of a ‘beard’ of grass blade tips hanging off the front face. Grass blade tips fold over the front face and it looks as if
The front face angle - grass doesn’t face angles.
the bottom blade has a beard. Many of you might have seen this before? The top face angle - The top face angle of a bottom blade ensures that once grass blade tips have been cut they are properly ejected away from the cutting point. This angle must be negative as well. If the angle on the top face is not correct (i.e. positive or neutral angle) grass blade tips will not be properly ejected from the cutting point and clippings will begin to collect on the cylinder. Eventually the cylinder will get clogged up with excess clippings.
Tools of the trade
One of the most important things you can do to keep your bottom blades in good shape is to keep them surgically sharp and maintained with the correct manufacturer’s front and top-f
examine turf in detail. This tool gives you an in-depth look to see exactly what is happening to your grass blade tips after cutting. Are they bruised and ragged, or turgid and green? The macroscope allows you to see for yourself. A prism gauge shows you how
To ensure your bottom blades are in good working order, it is always good to keep a facing tool handy like Bernhard’s Rapid Facer. A quick and easy facing tool will allow turf managers to apply a touch-up grind to the front face of bottom blades, keeping them in good working order. In addition, the company also supplies two new tools to take an ‘up close’ and in-depth look at your grass blade tips. A macroscope allows you to
Worn and damaged bottom blade
Grass blades cut with dull blades
your cutting units are performing. Are they all operating at the same height of cut and leaving smooth, clean edges? The prism gauge allows turf managers to view the cut and condition of their turf after being mown. You can see the blade tips and determine the height of cut. There is an easy to view ruler and magnification glass, which makes this the easiest tool to see what is really happening with your turf. It might be surprising, but you can drastically improve the quality of cut you achieve at your facility every day, just by paying a little more attention to your
Grass blades cut with sharp blades
bottom blades. Again, back to the basics - a good cut means healthier turfgrass, smoother surfaces and better working cutting equipment. As turf managers attempt to establish ideal turf standards at their facilities, they will try lower heights of cut, rolling, low fertility and low irrigation, but I’m convinced many would be amazed at the instant impact of a well-adjusted, sharp bottom blade.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132