RESEARCH I REVIEW
Vienna researchers reveal new material for ultra thin PV
Scientists at the Vienna University of Technology have managed to combine two semiconductor materials, consisting of only three atomic layers each. This new structure holds great promise for a new kinds of solar cell.
Extremely thin, semi-transparent, fl exible solar cells could soon become reality. At the Vienna University of Technology, Thomas Mueller, Marco Furchi and Andreas Pospischil have managed to create a semiconductor structure consisting of two ultra-thin layers, which appears to be excellently suited for photovoltaic energy conversion
Several months ago, the team had already produced an ultra-thin layer of the photoactive crystal tungsten diselenide. Now, this semiconductor has successfully been combined with another layer made of molybdenum disulphide, creating a designer- material that may be used in future low-cost solar cells. With this advance, the researchers hope to establish a new kind of solar cell technology.
Ultra-thin materials, which consist only of one or a few atomic layers are currently a hot topic in materials science today. Research on two-dimensional materials started with graphene, a material made of a single layer of carbon atoms. Like other research groups all over the world, Thomas Mueller and his team acquired the necessary know-how to handle, analyse and improve ultra-thin layers by working with graphene. This know-how has now been applied to other ultra- thin materials.
“Quite often, two-dimensional crystals have electronic properties that are completely different from those of thicker layers of the same material”, says Thomas Mueller.
His team was the fi rst to combine two different ultra-thin semiconductor layers and study their optoelectronic properties. Tungsten diselenide is a semiconductor which consists of three atomic layers. One layer of tungsten is sandwiched between two layers of selenium atoms.
A solar cell made only of tungsten diselenide would require countless tiny metal electrodes tightly spaced only a few micrometers apart. If the material is combined with molybdenium disulphide, which also consists of three atomic layers, this problem is elegantly circumvented. The heterostructure can now be used to build large-area solar cells.
70
www.solar-international.net I Issue IV 2014
When light shines on a photoactive material single electrons are removed from their original position. A positively charged hole remains, where the electron used to be. Both the electron and the hole can move freely in the material, but they only contribute to the electrical current when they are kept apart so that they cannot recombine. To prevent recombination of electrons and holes, metallic electrodes can be used, through which the charge is sucked away - or a second material is added.
“The holes move inside the tungsten diselenide layer, the electrons, on the other hand, migrate into the molybednium disulphide”, says Mueller.
This is only possible if the energies of the electrons in both layers are tuned the right way. In the experiment, this can be done using electrostatic fi elds. Florian Libisch and Professor Joachim Burgdörfer (TU Vienna) provided simulations to calculate how the energy of the electrons changes in both materials and which voltage leads to an optimum yield of electrical power.
“One of the greatest challenges was to stack the two
materials, creating an atomically fl at structure”, says Thomas Mueller. “If there are any molecules between the two layers, so that there is no direct contact, the solar cell will not work.”
Eventually, this feat was accomplished by heating both layers in vacuum and stacking it in ambient atmosphere. Water between the two layers was removed by heating the layer structure once again. Part of the incoming light passes right through the material. The rest is absorbed and converted into electric energy.
©2014 Permission required. Angel Business Communications Ltd.
Journal Reference: Marco M. Furchi, Andreas Pospischil, Florian Libisch, Joachim Burgdörfer, Thomas Mueller. Photovoltaic Effect in an Electrically Tunable van der Waals Heterojunction. Nano Letters, 2014; 140728125936002 DOI: 10.1021/nl501962c.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96