MANUFACTURING I EFFICIENCY
SOLAR POWER has been one of the biggest sources of new electricity generation for the last few years in Europe. Multiple factors have been boosting this development: homeowners and businesses looking for alternatives to ever-increasing energy prices, a trend for more environmentally friendly solutions and significant changes in the political and competitive landscape.
The increasing consolidation and competition in the market, as well as continuous research and investment, has led to more efficient panels and falling prices in the sector. Further fuelled by EU incentive schemes and feed-in tariff systems, migrating to solar energy has become more attractive than ever. With lower prices and higher returns on investment, grid parity for solar energy is now within reach in the next five to ten years. Keeping this in mind, it is no wonder that to date, more than 120,000 homeowners and businesses made use of these benefits and installed solar power panels, according to Solar Energy UK.
Higher performance makes solar viable
Conventional solar cells based on photovoltaic (PV) technology have come a long way over the recent years. In the early years of PV energy, most systems were directly connected to the application or charged a battery that then provided power to the application. These so- called ‘stand alone’ systems were not yet connected to the grid.
The connection between solar cells and the grid started in 2000 when various EU governments introduced feed-in tariff schemes. Feed-in tariffs allowed the public to produce and utillise their own energy, to feed any excess energy back into the grid, giving them the chance to use grid electricity to balance peaks in demand.
Since then, the development of the solar industry has been remarkable. The feed-in incentives have fuelled demand in the
Structure of N-type cell Issue IV 2014 I
www.solar-international.net 33
both the corporate and residential sectors. This has resulted in decreasing prices for solar modules and more funding for research and development. With the aim of reaching grid parity sooner rather than later, efficiency and performance are the key objectives for the industry in the next few years.
The residential market is one of the strongest resources for profit in the solar sector. Manufacturers must be able to produce the same amount of, if not more, energy with fewer modules, in order to be a viable alternative to other energy sources. This is especially true for manufacturers in densely populated areas such as London. Thanks to new technologies, like the n-type silicon wafer, this is now possible.
N-type improvements N-type cells are used as they give better performance or power output than the classic p-type cells. This means that the end customer will be able to use roof space much more efficiently, espcially in densely populated areas with limited roof space like London.
One of the key reasons for this is that n-type wafer has a better lifetime and minority carrier diffusion rate. These specific characteristics lead to more electric generation within the individual cells.
N-type cells also experience little-to-no light induced degradation or potential induced degradation, which can weaken the performance of the modules over time. The reason for this is that they use phosphorus doped wafers. The conventional p-type wafers are boron doped, meaning they react chemically with oxide and cause light induced degradation.
Another feature of n-type silicon wafers is that they are active from both sides. Each cell can make use of direct sunlight on the front side of the cell and indirect sunlight reflected onto the rear side of the cell, maximising light absorption.
This feature makes a significant impact in countries with fewer hours of sunshine and in the morning and evening when the sun’s rays are at their weakest.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96