CABLING & CABLE MANAGEMENT SUPPLEMENT FEATURE ACCELERATED DEVELOPMENT
Swiss cable system specialist Fortatech AG is now able to offer its customers a rapid response to prototype and development parts required on short lead times thanks to the services of Proto Labs
Left, right and below: Proto Labs has changed the economics and lead times associated with the production of prototype and low volume parts for
European manufacturers F
ortatech employs around 2,000 people worldwide who help supply
cable systems to customers in the automotive, machine building, aerospace, medical and scientific sectors. Of course, it is important for the company to stay on top of market trends, and one of the most notable in recent years is reflected by the notable rise in the demand for short lead time items. “Some of our customers now require
bespoke parts within 14 days of enquiry,” said Thomas Englert, general manager at Fortatech. “However, thanks to the help of Proto Labs, they will find the solution here.” With this statement in mind, Englert is keen to portray Fortatech as far more than a pure manufacturer, despite the fact it can produce up to 200,000 units of certain cables. He continued, “Our whole strength is
about benefiting the customer with our development and support, using our experience to engineer the right solution, which of course we can also manufacture in volume. Our customers demand short lead times, an extremely high degree of flexibility and yet uncompromising quality. Therefore, we need suppliers who are able to offer this level of excellence.” A recent example involves the
development of a special spring housing which biases a cable. The spring had to be surrounded by a pair of half shells that allowed the mechanism to slide within the roof of a convertible for a well known sports car manufacturer based in Zuffenhausen, Germany. In the short term, the customer required the delivery of 100 parts.
IN STEPS PROTO LABS “I immediately thought of Proto Labs,” recalls Zarko Andjelkovic, the project manager within the engineering department at Fortatech. “Importantly, we had to produce the parts from real production materials. There wasn’t an option to make rapid prototypes using
substitute materials as these have no validity under real operating conditions. Fortunately, the level of co-operation we received from Proto Labs was excellent.” Fortatech’s original idea was to connect
the two retaining halves by means of a clip design, a concept that within days was duly turned into reality using the Protomold rapid injection moulding service from Proto Labs. “The response from Proto Labs was
excellent. However, during assembly we realised that this type of connection did not meet our requirements,” added Andjelkovic. “In no time we had finished a second iteration, again produced using Protomold, which was joined by ultrasonic welding. This time, our rigorous laboratory testing proved positive. The client was amazed when we delivered it in record time, with documented test results and a scheduled plan for the delivery of production parts.” His enthusiasm is shared by Englert,
“We had real success with Proto Labs from the outset. We got a free analysis
only a few millimetres in diameter. “Again it is for the roof of a convertible,” said Andjelkovic. “Unfortunately I cannot say more because the model is still two years away from appearing on the market. However, during this period of development, Protomold allowed us to experiment in different plastic solutions. The part is traditionally made in metal, so the opportunity to produce it from inexpensive plastic is quite exciting. Furthermore, because the cable runs in the roof area and the assembly are exposed to the weather, potential corrosion problems are avoided.” Fortatech now also uses Firstcut, the
Proto Labs rapid CNC machining service. For example, on a project exploring different component materials. “It was about the suitability of stainless
that helped us derive a production oriented part design in our desired plastic. The high precision parts arrived in days. Financially, we are far better off too. The slightly higher cost of parts pales into insignificance compared with the cost of paying for a full production mould tool.”
ADVANTAGES IN ACTION The benefits of using the Protomold process are further demonstrated in another Fortatech application - a ball type holder for a cable end measuring
/ ELECTRICALENGINEERING
steel as a core material instead of fine zinc alloy,” explained Englert. “The part is L- shaped, measures only a few millimetres and is partially hollow. The stainless steel material forms the end of a cable strand and is over moulded with plastic. Due to the lead times involved, we would never have found a CNC shop prepared to adjust its schedule to meet our production demands. Proto Labs, on the other hand, provided us with these tiny stainless steel parts within just a few days so we could commence testing. As it turned out, although the connection was indeed resistant to corrosion, it offered a less powerful pull than the fine zinc variant. The use of Firstcut brought a fast and reliable response. This kind of outcome only serves to enhance our reputation and further satisfy our customers.” “We are very pleased that we can
respond quickly to our customers’ demands using the Protomold and Firstcut services,” concluded Englert. “Proto Labs has become a reliable partner, offering both speed and agility to Fortatech.”
Proto Labs
www.protolabs.co.uk T: 01952 683 031
Enter 241 CABLING & CABLE MANAGEMENT | JUNE 2014 S11
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64