INDUSTRIAL PLUGS & SOCKETS PRODUCTS
MAINTAINING PERFORMANCE WHEN THINGS HEAT UP
bulkhead mounted housing and a cable- side hood. The aluminium diecast hoods and housings feature a highly compressed surface with excellent non- stick properties. It also has a special non- stick coating on the bulkhead side seal which allows easy handling without significant sticking. The rugged contact inserts use LCP
A new high temperature connector family, the Han(R) HighTemp Series, has been introduced by HARTING which enables the reliable transmission of signals and power at temperatures up to 200°C in industrial environments. The design of the Han(R) HighTemp
Series is based on HARTING’s Han(R) B and Han(R) E series with the addition of temperature resistant materials and heat resistant design applied to all components such as contacts, insulating materials, housing, seals and grounding elements. During development, the resistance of these components was verified in HARTING’s in-house testing laboratory. The basic structure of the Han(R) HighTemp connector consists of a
(liquid crystal polymer) injection moulding to deliver temperature resistance coupled with mechanical stability. The temperature resistant contacts, for either screw or crimp termination, ensure reliable connections with minimal contact resistance even at extreme temperatures. High temperature connectors offer
significant savings in equipment design, manufacture and maintenance by removing the need to enclose machine parts which are exposed to high temperatures and clearing the way to modular plug-in designs. The resulting lower wiring complexity results in reduced maintenance costs, fewer outages and minimal down-times.
HARTING
www.harting.co.uk T: 01604 827 500
Enter 202 IMPROVING CONNECTOR OPTIONS
Binder has added to it’s range of connecting cables and distributors with the introduction of a range of M12 T-pieces suitable for the connection of two sensors, actuators or active components to the bus line for CANbus or DeviceNet. Versions are offered with either 5-pole male M12 to two female M12, 4-pole female M12 to one male one female M12 or 5-pole female M12 to one male and one female M12. These A-coded M12 interface connections have a connector
body of nickel plated brass, gold plated contacts, a rated current of 4A and 100 mating cycles and are protected to IP65 when mated. They are well suited for use in all types of control, automation and sensing equipment.
Binder
www.binder-connector.co.uk T: 01442 257 339
Enter 203
Wire in and clip on to the revolution in lighting control!
enough when you’re up against time, cost and sensitive building fabrics. At CP Electronics we’ve developed EBMINT – Miniature INT
Whatever your application we have a solution.
EBMINT BENEFITS
Can save up to 60% on lighting energy costs* Sensitive movement detection up to 7 metres Available in switching or dimming modes Quick to set up via infrared handset control Integral power supply – just wire into ballast
UK design and manufacture with 5 year warranty *Based on typical usage and optimal set up.
Call us today on +44 (0)333 900 0671 or visit our website
www.cpelectronics.co.uk Enter 7
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64