SUPPLEMENT PRODUCTS CABLING & CABLE MANAGEMENT COMBINING VERSATILITY, COST EFFECTIVENESS AND EASE OF INSTALLATION
design with a depth of 27mm which permits greatly reduced installation depth at the point of utilisation. Units in the Ha-VIS eCon 3000 family each feature up to ten Fast
Ethernet ports and offer economical and fast options to expand or set-up network infrastructures. Full Gigabit switches are available with up to seven ports each for applications with high data throughput. The slim design of the switches also allows them to be positioned on the carrier rail with a very high packing density. Thanks to the DIN-rail clip that is integrated into the housing, these switches can be swiftly and simply installed in the field, which consequently helps to save money and time. Switches in the Ha-VIS eCon 2000 family each offer up to 16 Fast Ethernet
HARTING has introduced two new families of unmanaged Ethernet switches that are optimised for use in harsh industrial environments and offer a choice of compact designs for economy and ease of installation in a variety of customer applications. With over 200 different models to choose from, along with a choice of
RJ45 or fibre optic cable ports, the HARTING Ha-VIS eCon 2000 and 3000 unmanaged Ethernet switches enable the cost effective expansion of existing network infrastructures as well as the development of new industrial networks. These compact ‘plug and play’ switches can be easily and quickly put into
operation. Two different compact, space saving housing designs, designed for ‘top hat’ rail mounting, guarantee available space in the switch cabinet. The eCon 3000 family is based on a very narrow form factor with a width
of 25mm which permits high packing density in the control cabinet, helping users to save costs. The eCon 2000 family, on the other hand, has a flat
ports and are also available in a 7-port full Gigabit version. This allows customers to expand or set-up network infrastructures in a time saving, economical way. Owing to the extremely flat design, the switches can also be accommodated in installations where space is restricted towards the cable connection at the front. RJ45 and fibre optic ports are located on the front of the switches, allowing cables to be connected quickly and simply. Power over Ethernet (PoE) allows power to be supplied to end devices
directly via the Ethernet data cable. PoE+ is a standard for the parallel transfer of energy and data using twisted pair cables. Switches based on the PoE+ standard offer more power for optional end devices. The new eCon ranges include switches with a 54V supply voltage and models with integrated voltage converters which allow the use of standard 24V power supplies. Using these switches consequently reduces the cabling effort, while saving time and money. The switches are designed for use over the industrial temperature range
from -40°C to 70°C, and comply with the relevant standards for use in the maritime and transportation markets.
HARTING
www.HARTING.com T: 01604 827 500 Enter 232
Enter 104
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64