ENCLOSURES See the light! O
EM Automatic can now offer the full Stego range of compact LED enclosure lamps.
The LED 025 series is suitable for all types of panels and enclosures especially where space is at a premium.
Installation time is reduced to a minimum with the choice of magnetic, direct panel or din rail mounting options.
The range is available with built-in on/off switch or an optional PIR movement sensor in all the popular supply voltages 12V, 24-48Vdc or 110-230Vac.
• Latest LED technology • 60 000+ hours life • UL approved
• Daisy chaining available
OEM Automatic Ltd Tel: 0116 284 9900 Web:
www.oem.co.uk
nclosure specialist ETA ENCLOSURES has published a new General Enclosures Catalogue which provides a valuable resource of product information along with a complete section on technical information. This new 340 Page Catalogue includes detailed information on the complete range of enclosure solutions as well as related accessories including Thermal Management products and flexible floor-conduit systems.
ETA Enclosures (UK) Ltd Tel: 01709 386630 Web:
www.eta-enclosures.co.uk
enter 814
The Complete Hand Held case solution T
340 Page Enclosures Catalogue available from ETA E
hree different configurations, in thirteen sizes, designed and moulded in Spain by Retex, and all
available online now from Evatron. The modern design of these enclosures,
offers a simple
construction that is resistant to wear and built for functionality.
From the smallest Series 31`pocket
case (55 x 40 x 18) in black or light grey, through to the Series 32 and 33 Control cases, these enclosures provide a quality solution for multiple control applications, with an optional gasket to achieve IP65 seal. There are various options for mounting a keypad in recessed areas in the cover, base and the
front and rear panels. The popular 33 series is also available in black or standard light grey, with a choice of blue, green, red, orange, black, yellow or grey coated corners for better protection and grip.
enter 813 Evatron Tel: 01908 675121 TECHNOLOGY IN ACTION
Latest QuantumX module H
BM has expanded its QuantumX modular data acquisition platform with the MX403B module to provide high-precision measurement of up to 1,000 Volts.
The
MX403B module has four differential channels for the direct measurement of electric voltages and is fitted with high insulation for maximum security. Each channel is equipped with analog anti-aliasing filters, digital filters and 24-Bit A/D converters while it outputs data with sampling rates of up to
100 kS/sec/channel and acquires signal bandwidths of up to 38 kHz. The parameters of the measuring ranges can be freely varied or fixed at 10V, 100V and 1,000V enabling the acquisition of high voltages and smaller differential voltages from high potentials against ground reference. The module was developed to the latest IEC 61010:2013 standard and has been certified by the VDE.
HBM United Kingdom Ltd Tel: 020 8515 6100 Web:
www.hbm.com enter 816
Aico Alarms and Control Switch fitted by Scottish Council
A
s part of a ten year programme West Lothian Council
is fitting Aico Smoke and Carbon
Monoxide (CO) alarms, with its unique Alarm Control Switch, across all 13,500 of its properties. West Lothian is responsible for over 170,000 people and has the fastest growing population in Scotland. The Council owns and manages a wide range of properties and takes the safety of its tenants very seriously. The council is fitting Aico 160RC Series mains powered Smoke and Heat alarms and Aico’s new Ei208WRF cost-effective Lithium battery powered CO alarms. The alarms are interconnected using Aico’s proven RadioLINK Professional wireless interconnection technology. RadioLINK allows alarms on the system to communicate with each other using RF signals rather than hard wiring. When one alarm is triggered, all the alarms interconnected on the system will sound, providing warning throughout the property.
Aico Ltd Tel: 01691 664100 36 JUNE 2014 | ELECTRICAL ENGINEERING Web:
www.aico.co.uk enter 817
DEAL NETWORKS launches its new data cable transmission tester, SignalTEK CT, designed with installers and network owners in mind who need to prove that copper cabling has been installed correctly and is capable of supporting Gigabit Ethernet applications to the international standard IEEE802.3ab. SignalTEK CT is a new generation of tester that is a cost-effective alternative to LAN cable certification. It carries out two primary tests via its Autotest function; a wiremap test and a data transmission test. The wiremap test displays crossed pairs, opens, shorts and split pairs, whilst the data transmission test performs at 100Mbit/s or 1000Mbit/s, providing 100% load on that link from both sides. This offers users a clear reading if the link really can support the desired Ethernet speed. SignalTEK CT comes in a kit with display and remote unit as well as rechargeable batteries, patch cables, power supply, multi-lingual manual and carry case.
Proof Of Performance! I
Ideal Networks Tel: 01925 44 44 46 Web
www.Signaltekct.com
enter 818 / ELECTRICALENGINEERING Web:
www.evatron.com enter 815
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64