This page contains a Flash digital edition of a book.
INDUSTRY FACES Industry Advocate Values Awareness, Engagement


In September 2013, the U.S. Occupational Safety and Health Administration (OSHA) released formal draft regulations that lower the permissible exposure limit (PEL) for crystalline silica. Te rule would reduce the current PEL of 100 micrograms of crystalline silica per cubic meter of air (µg/ cu.m) to 50 µg/cu.m, a change that would increase required protective measures such as air and medical monitoring, restricted work areas, respirator use and recordkeeping. Six months before that an- nouncement, Matt Sullivan, president of Buck Company Inc., a ferrous and nonferrous casting facility in Pennsylvania, was one of the metalcasting industry’s four representatives to appear before the Office of Management and Budget (OMB) to discuss the economic impact of the proposed regulations. “Advocacy seems contrary to your


samples. More than 40% of samples taken from the cleaning/finishing, sand system and abrasive blasting job catego- ries were above the current standard. “We’ve worked our tails off the last 15


years and we’re within reach of the goal line,” Sullivan said in reference to Buck Company’s effort to meet the current regu- lation. “Now, we’re going to move the target so far downhill, I don’t know how much money it will cost us to get there. You’ve got to enforce and achieve what you have in place before you move the bar.” OSHA plans to hold public hearings


on the silica regulations in March, and it could be several years before the rules are finalized. Sullivan believes the industry’s influence in altering the outcome with the silica proposal is limited. “Is OSHA going to change its mind


Sullivan, president of Buck Company, sees opportunity to influence future regulation through early involvement.


everyday business person’s mentality, but in reality, that’s how the game is played,” he said. “If you want to have any kind of say in what happens, you have to get involved and you have to be heard.”


Te metalcasting industry will be significantly affected


by the new silica regulation, with independent studies estimating costs for industry compliance at $1 billion per year. Yet a large number of metalcasting facilities currently do not meet the 100 µg/cu.m PEL, according to OSHA


PERSONALS Chromalloy, Palm Beach Gardens, Jason Humphries


Fla., announced Jason Humphries as its Business Development Director for the component repair developments for turbine engine manufacturers and operators at the company’s Carson City, Nev., and Mexicali, Mexico, operations. Humphries will lead global business development strategies in commercial aerospace, military and energy segments.


Dymax Corporation, Torrington,


Conn., appointed Paul Rachielles global marketing manager, where he will be responsible for developing and implementing strategic international marketing plans. Prior to joining Dymax, Rachielles handled corporate


and product development at PH2 Solutions in West Orange, N.J.


B&L Information Systems hired Jamie Kleca-Holse OBITUARIES Jon Krainz died Nov. 17, 2013. He was


52. Chief Electrical Engineer and Service Manager for Modern Equipment Com- pany Inc., Port Washington, Wis., Krainz was with the company for 26 years.


Paul Rachielles Jon Krainz January 2014 MODERN CASTING | 17


Jamie Kleca-Holse to its client ser- vices desk. Kleca-Holse will provide phone support for technical problem resolutions with B&L software.


on this matter? Tat’s to be determined,” he said. “I think meeting with the OMB on the back end of things did not appear to significantly change the outcome. Ideally, that same meeting should have


occurred years prior, during the working and drafting phase. Tat type of collaboration could lead to constructive change for all parties.” Industry advocacy in future regulations can be effective if individuals are engaged earlier in the process. “It’s about awareness of the issues,” he said. “Te leaders of


these foundries are bombarded by responsibilities. It is hard to pay attention to what’s going on with proposed regulations, but it’s a responsibility of the industry.”


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76