JS launch Condair high pressure humidifier
JS Humidifiers is launching the Condair HP, a new in-duct high pressure spray humidifier. It can deliver up to 1,300kg/hr of humidification and a potential 884kW of evaporative cooling from just 2.2kW/h of electricity. A high pressure pump provides water at around 70bar to a series of spray nozzles located on a stainless steel manifold inside an air handling unit. The nozzles release the water as a very fine mist that is quickly absorbed into the airstream. Any water that isn’t fully evaporated is removed from the air by a droplet separator guaranteeing droplet-free humidification. As the spray nozzles are located uniformly across the duct, the humidity is spread evenly for optimum humidification with minimal waste water. Seven stage operation on the standard model offers humidity control of ±4%RH while a close control option has 15-stage control and provides ±2%RH. The Condair HP can deliver
humidification in up to four AHUs from a single pump station with local control on each zone. This makes the humidifier an economic option for AHUs that incorporate humidification of incoming fresh air
as well as an evaporative cooling/heat recovery combination on the exhaust air. The Condair HP pump station features
a water-lubricated, oil-free stainless steel pump with an 8,000 hour guarantee, driven by a low energy Grundfos motor. The pump station also features optional integrated reverse osmosis water treatment plant making it ideal for areas without an existing RO water supply. The humidifier operates on RO water so that minerals are not introduced into the AHU. The Condair HP hygiene management system incorporates regular flush cycles
to ensure water cannot remain in the pipelines to stagnate. Optional ultra violet sterlisation will kill microorganisms in the water supply. All sections of the water system are manufactured in strict accordance with the HACCP/ISO 22000 Hygiene Management System. JS Humidifiers is the UK’s largest humidification company offering a comprehensive service of advice, design, supply, installation and maintenance. The company is part of Condair, the World’s largest humidifier manufacturing organization. Tel: 01903 850200
www.jshumidifiers.com
New asset management tags system from Spectrum
Spectrum Industrial has launched a new AssetTag system of holders and inserts for recording inspection and safety data on safety critical equipment, while also providing visually impactive warning information for potential users. There are five different holders in the range which means it has fewer SKUs and is lower in cost than any comparable product on the market. The holders are the ClawTag for pipe work or scaffold structures, the racking tag, the AssetTag MAX where more information is needed, the AssetTag Multi-Purpose and the AssetTag Mini for use on cables, smaller machinery and fall arrest equipment. All five holders are supplied in packs of five and all carry an integral ‘Do Not Use’ message as the default communication if specific tag inserts are missing. All are made from durable, flexible, weather proof reinforced nylon and all are easy to fix using a choice of rivets, tie wraps, adhesive strips or glue. The ClawTag as the name suggests has its own inbuilt claw fixing meaning it can be retrofitted to scaffold or pipes with no need for dismantling. The AssetTAG Mini can also be fixed using a key ring or split ring. There is a wide selection of polypropylene inserts to cover most commonly found industrial hazards, inspection status or operator information
46 product showcase
requirement. Inserts can also be customised by Spectrum to include logos or any other particular specification. All the holders have a ‘break’ in the edge for easy insert removal and replacement. Helping workers and management achieve compliance with legislation such as The Work at Height Regulations, the AssetTag system provides a record of the inspection process as well as an inspection checklist, reducing the risk of liability by
creating a clear audit trail. In the event of a failed inspection, the system warns personnel that equipment is not fit for purpose, avoiding potential accidents. Spectrum Industrial asset management products are available in all good safety distributors. More information can be found in the Spectrum Industrial catalogue or via the website at
www.spectrum-industrial.co.uk
Building & Facilities Management – October 2013
Product Showcase
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48