Tube Furnaces The Ideal Choice to Heat Small Samples
Where sample volumes are quite small or a high degree of uniformity is required, tube furnaces are a good choice. When selecting a tube furnace in addition to the operating temperature other important factors are needed, the heated length and the diameter. Some tube furnaces have the element wound directly on the worktube while other ranges require the addition of a separate worktube unless the sample is to be directly heated in an application such a tensile testing. This type of work is often easier if a split tube design is chosen. Accessories are available to work with vacuum or the addition of gas to the tube.
Carbolite offers a variety of stand options for different applications
Standard Confi guration Blanked Base
L-stand: Vertical Use
Horizontal Use
Wall Bracket
Separated Controls (No Stand)
MTF 1000 °C and 1200 °C Wire Wound Single Zone Furnaces The economical tube furnace with a variety of options
The MTF series is suitable for heating small samples with a high degree of uniformity, especially where volatile materials need to be captured for analysis or an atmosphere other than air is required.
Features 1000 °C and 1200 °C maximum operating temperature 15 mm, 25 mm or 38 mm heated tube inner diameters 130 mm, 250 mm, 400 mm or 850 mm heated tube length Integral wire wound worktube Control module, with furnace mounted directly on top
Carbolite 301 controller, with single ramp to set-point facility Delayed start / process timer function as standard Horizontal tube confi guration
1200°C 04 MTF 12/38/250 Continuous operating temperature is 100 °C below maximum temperature
Ovens & Furnaces
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60