The Carbolite product range comprises chamber furnaces and ovens from as small as one litre up to 10,000 litres and tube furnaces with heated lengths from as small as 130 mm up to several metres.
For 75 years Carbolite products have been the instrument of choice for research, testing and production processes worldwide. Carbolite offers an unmatched level of choice from standard product ranges and accessories or by customisation to meet specifi c requirements. All Carbolite furnaces are manufactured under an ISO 9001:2008 quality assurance scheme and are designed to comply with the EU Low Voltage and EMC directives and carry the CE mark.
The two most important factors for selection of the correct product are the task and the temperature range. For small sample size and good temperature uniformity, tube furnaces are the best choice. Tube furnaces also make it easier to collect volatiles or to work under controlled atmospheres. For larger sample volumes a chamber furnace may be more appropriate.
Chamber Furnaces for Ashing and High Temperature Use
Carbolite chamber furnaces are used for heat treatment of larger samples of materials so as to change their physical or chemical properties. Ashing furnaces have been designed to provide the optimum conditions to ash samples, without damaging effects upon the furnace. In addition to versatile general laboratory products Carbolite also manufacture a range of application specifi c furnaces for such uses as standard compliant testing of Coal & Coke, Precious Metals Assay, Asphalt Binder Analysis through loss on ignition, and many other applications.
TASKS
TEMPERATURE HEAT UP RATE
VOLUME SELECTION
CONSIDERATIONS FOR FURNACES AND OVENS
UNIFORMITY CONTROL DATA RECORDING MODIFIED ATMOSPHERE
ELF 1100 °C Furnaces
The easy to use furnace for a wide range of light laboratory applications
The ELF chamber furnace is especially useful for light laboratory use.
Features 1100 °C maximum operating temperature 6, 14 or 23 litre capacity Tilt forward, drop down door Temperature uniformity of ±5 °C
Controller with single ramp to set-point facility, delayed start & process timer function Vacuum formed, low thermal mass insulation Hard ceramic hearth fi tted as standard
1100°C 02 Continuous operating temperature is 100 °C below maximum temperature
ELF 11/6
Ovens & Furnaces
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60