Feature ‘Ask the expert’


Changing workforce – changing demands, but the solution remains the same


This month Brady’s Expert, Liz Gallagher takes the New Year as a timely opportunity to review visual safety around the workplace with key strategies and some thought- provoking insights about the impact of age at both ends of an employee’s career


trainers” and employers may not have the luxury of time-based traditional approaches to training and skill-build- ing. The training and learning process must be improved and streamlined and equipment visuals can make a sig- nificant contribution.


The theory behind ‘Equipment


Visuals for the Process Industry - a very human angle


rady colleagues have recently launched a whitepaper looking at Equipment Visuals in the Process Environment and it highlights a number of very interesting points, notably the need to embrace a changing workforce which encom- passes both ends of the age spectrum. For example, did you know that after the age of 60, the eyesight of a worker diminishes and requires eight times more lighting to see clearly? Hearing also declines often due to many years of working in high-noise workplaces. As our older workforce nears retire- ment, their younger replacements are often fewer in number, are expected to ‘hit the ground running’ and must master the ability to perform critical tasks correctly, the first time, while in a steep learning curve. The job of mentoring and training the younger workforce typically lands on the shoulders of the more senior, experienced operating and maintenance technicians. In many cases, these senior members of staff may not be “skilled


B


On equipment visu- als remove confu- sion and are an aid to both new and experienced workers


Right: Clear


pipemarking is an essential visual communicator of direction and contents


Below: Toughstripe floor-marking has the advantage of being both


extremely durable yet easy to remove and re-lay as required


Visuals’ is to aid the efficiency and effectiveness of the employee with equipment, including a wide variety of equipment-specific and task-specific clues that serve as reminders or warn- ings, for example, these can: • Communicate process settings or procedures


• Help expose hidden parts making equipment easier to inspect • Significantly reduce equipment-spe- cific training time by getting the important information ON the equip- ment where it’s needed • Reduce problem solving time Examples include:


• Gauge marking and labelling: Analogue gauges monitor, measure and communicate a wide variety of information including temperature, pressure, vacuum and flow. Colour coding allowable ranges in green and red (danger) communicates conditions very rapidly removing guesswork from the process


• Equipment Lubrication: Equipment requires lubrication, specifically the right lube, the right quantity and at proper intervals. Pumps, motors, agita-


tors, fans, valves and bearing blocks are often damaged by under, over or incorrect lubrication


• Pipe and valve identification, con- tents and flow. Essential for the safe identification of pipe contents and flow in both emergency and mainte- nance situations


Applied visuals can also go a long way to making the workplace friend- lier and employees’ job tasks easier to perform.


Brady T: 01295 228288


E: asktheexpert@bradycorp.com www.en.bradyeurope.com Enter 301


Colour coding floor zones


indicator throughout your working environment means that workers are at once advised of the area they are in. For example, corresponding to the safety sign colour coding floor tape can be colour-coded to reflect the working environment. Thus Red would mean: dangerous behaviour; stop; Prohibited area. Yellow would mean caution, risk of danger: Blue would mean safety gear needed of some form i.e. personal protection in the form of goggles, ear defenders or hardhats etc. and Green floor marking would indicate a safe area, for example First Aid Station, Emergency Exit etc. An ideal solution for floor marking, particularly in areas of heavy traffic is Brady’s ‘Toughstripe’ which, in addition to providing an extra-strong adhesive and durability, is easily lifted and re-laid should circumstances demand a workplace re-configuration.


A Factory Equipment JANUARY 2013 9


part from the Safety Signs and Signals Regulations (1996) there is no legislation in the UK governing the colour coding of separate flooring areas. However, adopting a universal visual


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56