Written in five languages, the manual (above left) for the DX7s is of necessity concise, but still thorough. Power supply—not charger—for the Tx comes with four interchangeable plugs (above right) for any international power grid. The AR 8000X is a DSMX type receiver (below left) and can be


used with the TM 1000 telemetry module. The DX7s will work with all DSMX and DSM2 receivers but not with the original DSM AR 6000 receiver. Parkflyer receivers should be used only for short range models. Model setups can be stored on the supplied flash card (below right).


Both arrows point to the respective holes (above left) where the tension of the control sticks can be adjusted with a small Phillips screwdriver.


FLYING MODELS


Closeup of the battery (above right) shows the shaped foam padding for the Ni-MH pack. A different one is supplied for the optional Li-Po.


29


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68