Advertorial
TECHNOLOGY IN ACTION
Nonhalogenated Epoxy has Excellent Flame Resistance
M
Norbar Gives £5,000 For Girls Rugby
from Norbar Torque Tools, based at nearby Banbury. The company is providing £5,000 donation to sponsor requirements for the Girls and Ladies teams over a 2-year period and a presentation cheque was recently handed to the Club by Norbar’s Managing Director Neill Brodey at its Stratfield Brake ground in Kidlington, Oxford. Andy Baulch, Director of Rugby at GABRFC, comments: “We really appreciate the commitment that Norbar has shown in supporting our Girls Rugby section. Their sponsorship will be used specifically for Girls and Ladies rugby, including the acquisition of playing kit, coaching development and local schools outreach. It will be a tremendous benefit to our programmes for this growing area of Gosford All-Black activities.”
G
Norbar Torque Tools Ltd, Tel: 01295 270333 E-mail:
sales@norbar.com
enter 811
osford All-Blacks Rugby Football Club (GABRFC) has received a boost for its Girls Rugby Section
aster Bond EP21FRSPLV offers outstanding flame resistance and minimal smoke generation even upon prolonged exposure to open flames. Master Bond EP21FRSPLV is a two component system with a one to one mix ratio. Designed for bonding, sealing and casting applications it also has a superior resistance to mechanical shock and vibration.
EP21FRSPLV is
resistant to exposure to water, salt solutions, fuels, and to many organic and inorganic chemicals. Master Bond offers a wide variety of one and two component epoxy systems for adhesive, sealing, and coating applications. Special grades are electrically conductive, thermally conductive/electrically insulative, optically clear, NASA low outgassing approved and mechanical shock resistant. Master Bond technical representatives provide personal one-on-one support and have years of experience solving complex manufacturing problems and working with customers throughout the design and prototype process.
Master Bond Inc. Tel: +1-201-343-8983 Web:
www.MasterBond.com
Insert Material - Brass versus stainless steel S
enter 812
PIROL Industries manufactures all standard inserts from brass. In the majority of situations brass will exceed the performance requirements of the application while providing the lowest installed cost solution. The thermal characteristic of brass enables the inserts to heat up and cool down quickly during the installation process into moulded plastic parts. For those inserts that are installed with heat or ultrasonics, the fact that the brass insert heats up quickly translates into faster installation time. From a quality perspective, the fact that brass cools quickly
means that immediately after the heat is removed from the insert the plastic will start to coagulate which will secure the insert in position and prevent it from “floating” within the hole. Compare this to a steel insert that takes significantly more time to heat up - the time it takes to melt the plastic and the total installation time is longer.
Spirol Industries Ltd Tel: +44 (0) 1536 444800 Off-the-shelf fatigue rated load cells from RDP W
hen load testing calls for a high number of repetitive cycles, such as material test machines or long-term structural tests in aviation or automotive research, then a common solution is to specify a fatigue rated load cell. Now RDP Electronics can usually offer an off-the-shelf alternative for rapid delivery. Because load cells used during repeated cycle testing programmes are themselves susceptible to fatigue failure the guaranteed limits are typically set less than the maximum static rating of the device. By operating RDP’s Model 41 load cell to perform within 75% or 50% of full range for example they can
be used for applications that would normally require a fatigue rated model. A major benefit of this is that many standard load cells up to 50,000 lbs are normally available ex stock from RDP, allowing urgent projects to proceed quickly.
RDP Electronics Ltd Tel. 01902 457512 Web:
www.rdpe.com enter 814
ensortechnics’ new SSO stainless steel pressure sensors accurately measure gage or absolute pressures in ranges from 200 mbar up to 35 bar. Fully welded, media isolated constructions with G 1/8 (BSP) threaded pressure ports allow for high media compatibility with corrosive liquids and gases. These devices are precision calibrated and temperature compensated and offer excellent repeatability as well as long-term stability. A fully analog compensation technique ensures a nearly unlimited pressure resolution as well as very fast response times. The sensors are based on proven piezoresistive silicon pressure sensing elements and offer OEM customers an excellent price/performance ratio.
S enter 815 44
Sensortechnics UK Tel: 01788 560426 Web:
www.sensortechnics.com
enter 816 MARCH 2011 Design Solutions Web:
www.spirol.com enter 813
Cost Effective Stainless Steel OEM
Pressure Sensors Offer Ranges from 200 mbar
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52