Technical Program HOYT MEMORIAL LECTURE
Friday, April 8 10:15 AM Room: Utopia AB
Engage, Empower and Align – Te Core of Next Generation Manufacturing
ALUMINUM
Wednesday, April 6 10:15 AM Room: Utopia B
Measuring Mold Cavity Filling Time in Low Pressure Permanent Mold Casting of Alumi- num Parts (11-003)
Self-Healing Metal Castings (11-051)
Effects of Mg-Addition, Sr-Modification and Solidification Rate on the Tensile Properties and Quality Index of 359 Type Al-Si-Mg Cast- ing Alloys (11-055)
2:00 PM Room: Utopia B
Understanding Quality in Aluminum Castings (11-013)
Improving Mechanical Properties in Aluminum through Enhanced Filtering Tech- niques (11-046)
Optimization of As-Cast Mechanical Properties in A356 via Simulation and Permanent Mold Test-Bars (11-053)
3:45 PM Room: Utopia B
Ablation of Hybrid Metal Matrix Composites (11-057)
Effect of Iron Content and Pouring Tempera- ture on 319 Semi-Solid Alloys Using the SEED Casting Method (11-061)
Effect of Mold Design on Porosity and Strength of a Centrifugally Cast Aluminum Alloy (11-058)
Tursday, April 7 8:30 AM Room: Utopia B
Improving Competitiveness through In-House Aluminum Chip Melting: A Case Study (11-098)
Modification of Al-Si Alloys (11-127)
Investigation of Chemical Additives on the Microstructure and Tensile Properties of Al- 2wt%Cu-Based Alloys (11-123)
2:00 PM Room: Utopia B
Development of Cast Al Alloys for Elevated Temperature (250C) Service (11-017)
Solidification and Heat Treatment of 6061 and 6082 Alloys for Use in Shape Casting (11-041)
Te Effects of Solidification under Pressure on the Porosity and Mechanical Properties of A206-T6 Cast Aluminum Alloy (11-048)
3:45 PM Room: Utopia B
Effects of Rare Earths on the As-Cast Micro- structure of an Al-Si-Mg Alloy (11-056)
PANEL: AFS Research: Mechanical Properties of E-357 Alloy Castings (11-178)
CASTING DESIGN & PURCHASING
Tuesday, April 5 10:15 AM Room: Euphoria
A Buyer’s & Designer’s Intro to Metalcasting Processes & Alloys (11-171)
2:00 PM Room: Euphoria
Identifying, Understanding & Reducing Defects in Metal Castings (11-172)
Wednesday, April 6 10:15 AM Room: Euphoria
How to Secure a Quality Casting Supplier (11-173)
Designing Metal Castings with Process Simula- tion, FEA as Tools (11-174)
2:00 PM Room: Euphoria
Cost-Effective Casting Design: A How-To for Designers and Purchasers (11-175)
3:45 PM Room: Euphoria
Examining the Validity of Integrally Cast Sample Bars (11-015)
Quality Assurance with Process Compensated Resonant Testing (11-036)
Tursday, April 7 2:00 PM Room: Euphoria
PANEL: Exploring Iron Casting’s Potential for Designers & Buyers (11-176)
CAST IRON
Tuesday, April 5 3:45 PM Room: Utopia A
Avoiding Shrinkage Defects in Ductile Iron (11-141)
Centrifugal Filtration Unit for Heavy Casting Filtration (11-078)
Wednesday, April 6 8:30 AM Room: Utopia A
PANEL: Remembering Dr. Carl Loper, Jr.: Part 1 (11-130)
10:15 AM Room: Utopia A
PANEL: Remembering Dr. Carl Loper, Jr,: Part 2 (11-131)
2:00 PM Room: Utopia A
Honorary Lecture: Cooling Curve Analysis—A Mature Melt Quality Control Technique (11-128)
Tursday, April 7 8:30 AM Room: Utopia A
PANEL: Te Cast Iron Division - Past, Present and Future (11-129)
2:00 PM Room: Utopia A
Sponsored Research: On the Effect of Casting Skin on Fatigue Properties of CG Iron (11-020)
Influence of Iron Powder Addition on the Solidification and Structure of Slightly-Hyper- eutectic Gray Cast Iron (11-016)
Sponsored Research: Effect of Alloying Ele- ments on Gray Iron Natural Aging, Part 1, Manganese (11-022)
3:45 PM Room: Utopia A
Solidification of Ductile Iron Revisited (11-064)
Intercritically Austempered Ductile Iron (11-043)
Microstructure Analysis Trough Termal Analysis (11-068)
March 2011 MODERN CASTING | 47
(as of February 21)
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84