This book includes a plain text version that is designed for high accessibility. To use this version please follow this link.
11-01 :: December 2010 / January 2011


nanotimes News in Brief


Electronics // Microchip Harvests Its Own Energy


R


esearchers from the University of Twente’s MESA+ Institute for Nanotechnology, toge-


ther with colleagues from the University of Nankai in China and University of Utrecht, Netherlands, have for the first time succeeded in manufacturing a microchip with an efficient solar cell placed on top of the microelectronics. The researchers presented their findings at the International Electron Device Meeting in San Francisco.


The placement of a solar cell directly on top of the electronics means the autonomous chip does not need batteries. In this way, for example, a sensor chip can be produced, complete with the necessary intelligence and even an antenna for wireless com- munication. However, the chip’s energy use must be well below 1 milliwatt, say the researchers. The chip can then even collect enough energy to operate indoors.


The simplest solution would seem to be to manufac- ture the solar cell separately and then fit it on top of the electronics, but this is not the most efficient pro- duction process, so instead the researchers use the chip as a base and apply the solar cell to it layer by layer. This uses fewer materials, and also ultimately performs better. But the combination is not trouble- free: there is a risk that the steps in the production of the solar cell will damage the electronics so that they function less efficiently. For this reason the re-


searchers decided to use solar cells made of amor- phous silicon or CIGS (copper – indium – gallium – selenide). The manufacturing procedure for these cells does not influence the electronics, and these ty- pes of solar cells also produce sufficient power, even in low light.


Tests have shown that the electronics and the solar cells function properly, and the manufacturing pro- cess is also highly suitable for industrial serial produc- tion with the use of standard processes.


The research was carried out in the Semiconductor Components group led by Prof. Jurriaan Schmitz.


The researchers collaborated with colleagues from Nankai University in Tianjin, China and the Debye Institute of Utrecht University. The research was made possible by the STW Technology Foundation.


http://www.utwente.nl/en


45


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95
Produced with Yudu - www.yudu.com