SUBMERGED ARC & AUTOMATIC EQUIPMENT
Submerged Arc & Automatic Equipment Options See the “Recommended Equipment Options” section for descriptions.
LN-8 and LN-9 Wire Feeders Required Options
Submerged Arc Gun and Cable Assemblies See Submerged Arc Guns in the “Guns and Torches” section.
Drive Roll and Guide Tube Kits See Drive Roll and Guide Tube Kits chart in the “Recommended Equipment Options” section.
Control Cables and Adapters See Control Cables and Adapters chart in the “Recommended Equipment Options” section.
Weld Power Cables See Weld Power Cables chart in the “Recommended Equipment Options” section.
General Options K1524-3 Heavy Duty Wire Reel Stand K1555-1 Insulated Lift Bail K1556-1 Light Duty Caster Kit K1557-1 Swivel Platform K1504-1 50-60 lb. (22.4-27.2 kg) Coil Adapter, 2 inch (50.8 mm) spindle
K1634-2 Plastic Wire Cover - up to 60 lbs. (27.2 kg) K261 K202 K305 K163 K110
Wire Feed Speed Meter Kit Burnback Kit
Wire Reel and Flux Tank Assembly Undercarriage
Mechanized Hand Travel Unit
K161-50 Squirtmobile® Power Pack, 50 ft. (15.2 m) K283
Portable Digital Wire Feed Speed Meter
LT-7 Tractor Required Options
Weld Power Cables See Weld Power Cables chart in the“Recommended Equipment Options” section.
K148A K148B
Positive Contact Nozzle Assembly for 3/32-1/8 in. (2.4-3.2 mm) Wire
Positive Contact Nozzle Assembly for 5/32-3/16 in. (4.0-4.8 mm) Wire
General Options KP2268-1 LT-7 Drive Roll 052-1/16 (2 required) KP2268-2 LT-7 Drive Roll 068-3/32 (2 required) KP2268-3 LT-7 Drive Roll 3/32-3/16 (2 required) KP2268-4 LT-7 Drive Roll 045-052 (2 required) KP1890-1 Drive Roll Center 5/64-3/32 Tiny Twin KP1890-2 Drive Roll Side 5/64-3/32 Tiny Twin KP1984-1 Guide Tube Assembly 068-3/16 Incoming KP1985-1 Guide Tube 3/32-3/16 Outgoing KP1986-1 Guide Tube Outgoing Tiny Twinarc® KP2127-1 Guide Tube Incoming TinyTwin Tractor
Control Cables and Adapters See Control Cables and Adapters chart in the “Recommended Equipment Options” section.
K149-5/32 Nozzle Extension for 5/32 in. (4.0 mm) Wire K232 K229 K230 K396 K285
Horizontal Fillet and Lap Adapter Kit Flat Fillet Adapter Kit Butt Seam Guide Kit
Track Section - 70 in (1.8m) Concentric Flux Cone Assembly
NA-3S and NA-4 Required Options
Control Cables and Adapters See Control Cables and Adapters chart in the “Recommended Equipment Options” section.
Weld Power Cables See Weld Power Cables chart in the “Recommended Equipment Options” section.
General Options Drive Roll /Guide Tube Kits See Drive Roll and Guide Tube Kits chart in the “Recommended Equipment Options” section.
K221 K245 K96 K29
K219 K299
Start Controls P.C. Board for Automatics Crater Fill Controls P.C. Board for Automatics Horizontal Adjuster, 2 in. (50.8 mm) Vertical Lift Adjuster, 4 in. (101.6 mm)
K325HCS TC-3 High Capacity Travel Carriage, Multiple Heads & Controls, 5-75 ipm. Automatic Flux Hopper Assembly
K278-1
Wire Reel Assembly for 50-60 lb. (22.7-27.2 kg) Coils (without high frequency insulation) Spreadarc Oscillator
K1733-5 Wire Straightener (Automatics)
Single Electrode Options K231-1
Contact Nozzle Assembly for 3/32, 1/8 and 5/32 in. (2.4, 3.2 and 4.0 mm) Wire
KP2721-1 Nozzle Extension, 5 in. KP2082-2B1 Contact Tip, 5/64 in. (2.0 mm), 3/8-24 in. (9.5-609.6 mm) thread
KP1962-3B1 Nozzle Tip, 3/32 in. (2.4 mm) wire diameter KP1962-1B1 Nozzle Tip, 1/8 in. (3.2 mm) wire diameter KP1962-4B1 Nozzle Tip, 5/32 in. (4.0 mm) wire diameter KP1962-2B1 Nozzle Tip, 3/16 in. (4.8 mm) wire diameter KP1962-5B1 Nozzle Tip, 7/32 in. (5.6 mm) wire diameter K148A
Positive Contact Nozzle Assembly for 3/32-1/8 in. (2.4-3.2mm) Wire
K148B K285
K386 K226R
Positive Contact Nozzle Assembly for 5/32-3/16 in. (4.0-4.8mm) Wire Concentric Flux Cone Assembly Narrow Gap Deep Groove Nozzle
Contact Jaw Assembly for 1/8-7/32 in. (3.2-5.6 mm) Wire
K149-5/32 Nozzle Extension for 5/32 in. (4.0 mm) Wire Twinarc®
Options
K129-1/16 Tiny Twinarc® Assembly for 1/16 in. (1.6 mm) Wire
K129-5/64 Tiny Twinarc® Assembly for 5/64 in. (2.0 mm) Wire
K129-3/32 Tiny Twinarc® Assembly for 3/32 in. (2.4 mm) Wire
K225 K281
Submerged Arc Twinarc® Nozzle for 5/64, 3/32 and 1/8 in. (2.0, 2.4 and 3.2 mm) Wire Tiny Twinarc® Solid Wire Straightener
Tandem Arc Options K387 K390 K389
Tandem Arc Framework Assembly Tandem Arc Wire Reels and Mountings Flux Hopper Assembly
Power Source Options For NA-3S Idealarc®
For NA-4 Idealarc® and DC-1500
DC-600, DC-655, DC-1000 AC-1200
NA-5 General Options
Control Cables and Adapters See Control Cables and Adapters chart and Drive Roll and Wire Guide Kits Chart in the“Recommended Equipment Options” section.
K2163-35 Weld Power Cable, Lug to Lug (4/0), 35 ft. (10.7 m)
K2163-60 Weld Power Cable, Lug to Lug (4/0), 60 ft. (18.3 m)
K1842-110 Weld Power Cable, Lug to Lug (4/0, 600A, 60%), 110 ft. (33.5 m)
K338-46 Control to Head Cable Extension, 46 ft. (14.0 m) K335-26 Control to Head Cable Extension, 26 ft. (7.9 m) K231-1
Contact Nozzle Assembly for 3/32, 1/8 and 5/32 in. (2.4, 3.2, 4.0 mm) Wire
KP2721-1 Nozzle Extension, 5 in. (127 mm) K226R
K148A K148B
Contact Jaw Assembly for 1/8-7/32 in. (3.2-5.6 mm) Wire
Positive Contact Nozzle Assembly for 3/32-1/8 in. (2.4-3.2 mm) Wire
Positive Contact Nozzle Assembly for 5/32.-3/16 in. (4.0-4.8 mm) Wire
K149-5/32 Nozzle Extension for 5/32 in. (4.0 mm) Wire K386
Narrow Gap Deep Groove Nozzle
KP2095-15 Liner Spring, .133 in. ID, .240 in. OD, 12.60 in. (3.4 mm ID, 6.1 mm OD, 320.0 mm)
KP2108-1B1 Nozzle Tip KP1966-2B1 Contact Tip, Pressure Shoe Type, 1/16 in. (1.6 mm) wire diameter
K285 K225
Concentric Flux Cone Assembly
Sub Arc Twinarc Nozzle for 5/64, 3/32 & 1/8 in. (2.0, 2.4, 3.2 mm) Wire
K129-1/16 Tiny Twinarc® Assembly, 1/16 in. (1.6 mm) Wire K129-5/64 Tiny Twinarc® Assembly, 5/64 in. (2.0 mm) Wire K129-3/32 Tiny Twinarc® Assembly, 3/32 in. (2.4 mm) Wire Tiny Twinarc® Solid Wire Straightener Solenoid Kit
K281 K223
K325HCS TC-3 High Capacity Travel Carriage, Multiple Heads & Controls, 5-75 ipm.
K299
K162-1 K29 K96
K278-1 K334
Wire Reel Assembly for 50-60 lb. (22.7-27.2 kg) Coils (without high frequency insulation). Spindle Kit, 2 Inch (50.8 mm) Hub Vertical Lift Adjuster, 4 in. (101.6 mm) Horizontal Adjuster, 2 in. (50.8 mm) Spreadarc Oscillator Start or Crater Module
K337-10 Weld Timer Module - maximum time 9.99 sec. K336 K219
Remote Interface Module Automatic Flux Hopper Assembly (NA-5N only) K1733-5 Wire Straightener (Automatics)
www.lincolnelectric.com/subarc | 67
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138 |
Page 139 |
Page 140 |
Page 141 |
Page 142 |
Page 143 |
Page 144 |
Page 145 |
Page 146 |
Page 147 |
Page 148 |
Page 149 |
Page 150 |
Page 151 |
Page 152 |
Page 153 |
Page 154 |
Page 155 |
Page 156 |
Page 157 |
Page 158 |
Page 159 |
Page 160