PLASMA CUTTING SYSTEMS Tomahawk 375 Air ™
Plasma Cutting - Anywhere, Anytime The Tomahawk™
• Continuous Output Control – Focus the arc for different material thickness.
• Touch Start system – Reliable plasma arc initiation without high frequency.
• Rapid Arc Restrike – Fast cutting through gaps, even expanded metal.
• Front Panel Purge Control – Makes it easy to set the air flow rate without initiating the plasma arc.
• Cool Operation, Long Consumable Life – New electrode and nozzle design save you money in the long run.
• Added Safety – Our Parts-in-Place system detects correct installation of consumables and torch.
• Engine Drive Compatible – Select a Lincoln Electric® Ranger®
or Vantage® in remote locations. Product Product
Tomahawk™ 375 Air
Input Power 208/230/1/60 Rated Output
13A@85.2V 100% 18A@87.2V 60% 25A@90V 35%
Input Current 21.7A to power your Tomahawk™
Shown: K2806-1
Tomahawk™ Pilot Output Air Pressure
Name Number Voltage/Phase/Hertz Current/Voltage/Duty Cycle @ Rated Output Current Range Required K2806-1
17A 10-25A 80-110 PSI 375 375 Air plasma cutting system arrives ready to go, for fast and precise cutting. With the 375 Air, forget the grinder – simply pick up the torch and cut in seconds.
• Ultimate Portability – Internal air compressor enables operation in environments where external compressed air is not available.
www.lincolnelectric.com/green
Processes • Plasma Cutting
Output DC Input 1 PHASE
60 Hz
Unit Includes • Internal air compressor (external air connection also standard)
• Lincoln Electric LC25 Torch with 10 ft. (3.0 m) cable
• Air regulator and pressure gauge • Internal water separator •Work clamp and cable • Spare consumables • Shoulder strap • Input power cord
Key Options • K2886-1 Plasma Circle Cutting Guide Kit • K2377-1 Small Canvas Cover • K2846-1 LC25 Handheld Plasma Torch, 10 ft. (3 m)
Consumables Options • KP2842-1 Electrode (LC25) • KP2842-2 Nozzle, 25A (LC25) • KP2842-3 Retaining Cap (LC25) • KP2842-4 Swirl Ring (LC25,LC40) • KP2842-5 Spacer (LC25)
Literature E11.100
Air Flow Rate
70 psi@ H x W x D 15.2 x 8.5 x 18.9
(6-7.5 Bar) 125-200 SCFH (385 x 215 x 480) 5 Bar@80 L/min
Tomahawk 625 ™
Plasma Cutting - Anywhere, Anytime Tomahawk™
• Continuous Output Control – Focus the arc for different material thickness.
• Touch Start System – Reliable plasma arc initiation without high frequency.
• Rapid Arc Restrike – Fast cutting through gaps, even expanded metal.
• Front Panel Purge Control – Makes it easy to set the air flow rate without initiating the plasma arc.
• Cool Operation, Long Consumable Life – New electrode and nozzle design save you money in the long run.
• Added Safety – Our Parts-in-Place system detects correct installation of consumables and torch.
• Lightweight and Portable – Easily carried by one person.
• Engine Drive Compatible – Select a Lincoln Electric Ranger® or Vantage®
to power your Tomahawk™ Product Product
Tomahawk™ 625
Input Power in remote locations. Rated Output
24A@89.6V 100% 29A@91.8V 60% 40A@96.0V 35%
Input Current 36.8A Pilot Output Air Pressure
Name Number Voltage/Phase/Hertz Current/Voltage/Duty Cycle @ Rated Output Current Range Required K2807-1 208/230/1/50/60
70 |
www.lincolnelectric.com/plasma 17A 10-40A 80-110 PSI
Shown: K2807-1
Tomahawk™ 625
www.lincolnelectric.com/green plasma cutting systems are portable enough to carry to any jobsite. Hook up the compressed air, grab the torch and start cutting right away.
Processes • Plasma Cutting
Output DC Input 1 PHASE
Unit Includes • Lincoln Electric LC40 torch, 20 ft. (6.0 m) cable
• Air regulator and pressure gauge • Internal water separator •Work clamp and cable • Spare consumables • Shoulder strap • Input power cord
Key Options • K2886-1 Plasma Circle Cutting Guide Kit • K2377-1 Small Canvas Cover • K2847-1 LC40 Handheld Plasma Torch, 20 ft. (6 m)
Consumables Options • KP2843-1 Electrode (LC40) • KP2843-2 Nozzle, 40A (LC40) • KP2843-3 Nozzle (Direct Contact), 40A (LC40)
• KP2843-5 Retaining Cap (LC40) • KP2842-4 Swirl Ring • KP2843-9 Nozzle (Direct Contact), 25A (LC40)
• KP2843-10 Spacer (LC40, LC65)
Literature E11.200
Air Flow Rate
H x W x D 70 psi @ 15.2 x 8.5 x 18.9
(6-7.5 Bar) 125-200 SCFH (385 x 215 x 480) 5 Bar@80 L/min
Net Weight
in. (mm) (w/o Torch) lbs.(kg) 34
(15.42) 5060 Hz Net Weight
in. (mm) (w/o Torch) lbs.(kg) 40
(18)
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138 |
Page 139 |
Page 140 |
Page 141 |
Page 142 |
Page 143 |
Page 144 |
Page 145 |
Page 146 |
Page 147 |
Page 148 |
Page 149 |
Page 150 |
Page 151 |
Page 152 |
Page 153 |
Page 154 |
Page 155 |
Page 156 |
Page 157 |
Page 158 |
Page 159 |
Page 160