Applications.. Products Available fromAE
RFDesign AEL:
Customfilters 2,4,6 or 8 pole Crystals 4.0x2.5mm,
3.2x2.5mm&2.5x2.0mm Tight stability crystals
to +/-4ppmover temperature TCXO/VCTCXO3.2x2.5mm
& 2.5x2.0mmwith 1.8&2.0V input voltages available
WHAT’S NEW
High power, small size resistors
Stackpole Electronics has announced the release of the RNS Series of ultraminimetal filmthru-hole resistors. Designedwith options including a standard 1/8watt body sizewith a½watt power rating, the ¼watt size has a 1watt power rating, and the½watt size has a 2 watt power rating. The RNS is able to achieve this high power handling performance through tightmanufacturing control of a unique power filmalloy. Asmore andmore products attempt to downsize and add features, this serieswill be usefulwith helping design engineers to achieve these size reductions and added functionality goals in an axial leaded resistor form. The RNS Serieswill be ideal for a variety of applications and end
products including home appliances, solid state power supplies, instrumentation, safety equipment,welding systems, robotics, and industrial power and control applicationswhere an axial leaded resistor robust performance under harsh environmental conditions is desired. Pricingwill vary depending on size, tolerance, TCR and resistance value and ranges from$0.015 to $0.10 each in full reel quantities. Contact Stackpole or one of our franchised distributors for volume pricing.
www.seielect.com
Connector for electric vehicles
AEL Crystals Limited Quality Frequency Control Components
www.aelcrystals.co.uk Tel: +44 1293 789200
sales@aelcrystals.co.uk
ITT Interconnect Solutions has achieved an electric vehicle industry first with its new high efficiency, high reliability J1772 connector. Based on HEP spring contact technology, the new EVC Series connectors represent the industry's first UL- rated, J1772 Level II 75 amp four hour or less full charging solution. Charging options include 75A/240V, 30A/240V, 15A/240V, and 15A/120V. Designed specifically for electric vehicle charging applications, the J1772 is capable of performing Level I and II charging froma low-end of 15A/120V to a high-end range of 75A/240V. The inlet connector includes finger-tip protection on the
power & ground pin contacts and also features an enhanced cablemanagement systemusing ITT's VEAMCIR series backshells. By using a cable with a greater degree of flexibility, ease-of-use is assured on retractable design charging units.
The new UL-approved J1772 Level I and II electric vehicle
charging robust coupler and inlet connectors are suitable for electric passenger vehicles, home charging units, public infrastructure charging units, roadside assistance trucks, electric fleet vehicles, and electricmotorcycles.
www.ittcannon.com 60 | September 2010
www.electronics-sourcing.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68