INSULATION C
hanges to Building Regulations for the conservation of fuel and power (Approved Document Part L) set higher standards for energy efficiency in new homes. To meet these requirements, our customers must adapt too. New solutions may need to be sourced and installed - and merchants have a vital role to play. The regulation’s overall aim is to reduce the carbon emissions of new homes by 31 per cent. These requirements are set out in Part L Volume 1 and 2. Volume 1 covers new builds as well as extensions and changes to existing domestic properties. Volume 2 applies to non- domestic buildings.
Meeting the new rules will in part, be achieved by improving the fabric of a building and that means new U-values for walls, roofs, floors, windows and doors on domestic properties. New homes will be assessed under a Standard Assessment Procedure (SAP) calculation called SAP 10.2, which succeeds SAP 2012 (9.92).
Questions raised
From our customers’ perspective, the changes have led to queries across two areas. The first relates to timescales and which projects will be affected. A common misconception is that the rules apply to all new builds and extensions constructed from 15 June 2022. However, planning applications approved before this date can be constructed under previous regulations, as long as the building work begins before 15 June 2023.
The second area is the impact on building external walls, specifically the cavity size required. The average U-value that can be achieved with a traditional 100mm cavity is around 0.25 W/m²K. However, the update to Part L uses a ‘notional’ building recipe to set targets for carbon emissions, fabric energy efficiency and primary energy, which uses a U-value of 0.18 W/m²K for the walls. To reach the notional target for a wall, a larger cavity of around 150mm can be used. Although this will require thicker and more expensive insulation than a 100mm cavity, customers will also need to spend more on larger lintels, cavity closers and wall ties creating higher ancillary costs. A larger cavity can also mean less room space.
On balance, most builders want to stick with the traditional 100mm cavity if possible, and are seeking new solutions that can help them cost-effectively meet the new regulations.
Keeping options open In response, merchants are stepping up to advise customers on their options and provide a range of products that can help. By assessing
30
ADAPTING TO CHANGE
Nick Khan, Group Insulation and Drylining Manager at independent builders’ merchant, Beesley & Fildes, talks to BMJ about changes to Building Regulations (Part L) for England, and how merchants and their customers are responding.
all the different components that make up the wall and adjusting where needed, we can help them to meet the target U-value without changing the traditional 100mm cavity. For example, using a very thermally efficient, lightweight block like Celcon Standard combined with EcoTherm full fill cavity insulation and a standard plasterboard on the internal walls will meet the new regulations. Alternatively, a medium density block such as Fibolite could be used with the same insulation plus an insulated plasterboard. This will enable builders to save on the block costs if preferred. For those that decide to increase the cavity to 150mm, using Knauf DriTherm 32 in a 150mm thickness with a Celcon Standard block will meet the target U-value. Ultimately, the decision will depend on
the needs of the individual customer and the nature of the project, considering factors such as budget, labour and product lead times.
Spreading the word
As with all types of change, it takes time to adjust and with various solutions available for cavity walls, raising awareness is also key. At Beesley & Fildes we are in regular discussions with housebuilders to advise them on their options for meeting the new Part L. Our next step will be to visit customers in person to present the different constructions for both 100 and 150mm cavities.
By working in partnership and navigating the changes together, we can provide our customers with bespoke solutions that hit all the right targets. BMJ
www.buildersmerchantsjournal.net May 2023 Left: Nick Khan, Beesley & Fildes’ group insulation and drylining manager.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44
