Advertorials PerforMore: the compact connector system for
powerful electric vehicle drivetrains Developed to meet the demanding requirements of electric and hybrid vehicle drivetrains, the new PerforMore connector system from Stäubli Electrical Connectors can carry a continuous current of 400A or more with minimal power loss.
The rugged devices are suitable for connecting the whole drivetrain, including batteries, inverters, motors and high voltage distribution units. Their low contact resistance is due to the company's proprietary MULTILAM multi-contact system, which also guarantees strong resistance to vibration and elevated temperatures.
The PerforMore is exceptionally compact, with a pitch only usually found with significantly lower current ratings, while maintaining the clearances and creepage distances necessary for high operating voltages. In the mated condition in particular, its low profile gives a clear advantage in the efficient use of available vehicle space.
Installation is quick and easy, while disassembly is user friendly and safe, with protection against accidental disconnection and arc flash. This is due to a two stage unlocking system which ensures the high voltage interlock loop is interrupted in the first stage before disconnection of the live contacts in the second stage.
The two pole connector has 10mm diameter contacts and is rated at 1000V, as defined in LV215 standards. Robust and reliable, it features ingress protection to IP67 and IP69 according to IEC 60529 when mated, and IP2X unmated.
Mechanical keys and colour coding offer additional flexibility and safety if using more than one connector in a vehicle, by eliminating the risk misconnections.
A high number of evenly distributed contact points in the power contact shielding ensures high quality 360 degree EMC shielding even at high frequencies.
The highly efficient power transfer and long operating life make the PerforMore ideal for powerful electric cars, vehicles with fast charging capabilities and utility vehicles such as trucks and buses.
www.staubli.com
CamdenBoss’ CNMB modular DIN Rail enclosure: Create your CNMB, your way
The CamdenBoss CNMB DIN Rail series of enclosures is built up on a selection of modular housings which are available in eight lengths and four body styles. The combination of modular ingenuity and adaptability enables this enclosure to succeed in almost any application. Ideal for electronics in industries such as drive and controls, home automation, HVAC and IoT and more.
Utilising a wealth of features and benefits, the CNMB’s modular design and snap-fit capability allows OEM’s to select piece parts based on their exact requirements. Alternatively, you can select from a number of pre-kitted options.
To help with the selection process, we’ve
created a useful guide containing everything you need to know about the CNMB range. Visit our website
https://www.camdenboss.com/cnmb to download the guide or call our sales team on 01638 716101 to request a hard copy.
CamdenBoss Ltd Tel: 01638 716101
sales@camdenboss.com
www.camdenboss.com
Easily create CAN bus-enabled touchscreen
interfaces Lascar’s Design Studio software is now available with an easy to use but powerful CAN bus module that means creating custom HMI interfaces has never been simpler. Design Studio is free to download and is fully compatible with the PanelPilotACE 7” full- colour touchscreen
hardware used with the S70-CAN add-on module. A newly updated CAN bus user guide has just been released to walk developers through integrating CAN bus with Design Studio’s many data handling and GUI tools.
For more information on PanelPilot and Design Studio call Lascar:
Tel: 01794 884567 email
sales@lascar.co.uk www.lascarelectronics.com
Footprint compatible high voltage modules added to HVM range
HVM Technology have added to their range of High Voltage dc/dc converters with a product family that is footprint compatible with a very similar device from one of their leading competitors.
The Di-Q is a pin for pin drop in equivalent unit. This unit comes in a ultra miniature 0.5 square case, is pcb mountable and provides a complete high voltage solution with no external components being required. The family of low cost ultra-miniature single output DC to DC converters supplying up to 5kV in 0.125 cubic inches (0.5” x 0.5” x 0.5”) from either a 5V or 12V input.
HVM’s proprietary resonant converter design minimises quiescent current and operating noise while delivering maximum performance and reliability. A special feature of this power supply is its extremely low input current at no load, making it ideal for battery powered applications.
The output voltage is directly proportional to the input voltage from approximately 0.7V input to maximum input voltage, allowing for a controllable output voltage and features excellent linearity.
The output power rating is 0.5W and the input to output isolation is ± 500V.
The DI-Q Series is very stable over a wide operating temperature range.
They are intended to be higher performance, lower cost direct drop-in
replacements for EMCO Q-Series devices, HVM offer short leadtimes and competitive advantages.
• Higher Performance Drop-In Replacement for EMCO Q Series • Ultra-Miniature Case Size (0.5” x 0.5” x 0.5”) • PCB Mountable
• No External Components Required • Extremely Low Quiescent Current • Low Ripple and EMI/RFI • High Input/Output Isolation • Wide Operating Temp Range (-55°C to +70°C) • Available in positive or negative outputs
www.lusoelectronics.com/footprint-compatible-high-voltage-modules-added-to-hvm-range/
ZF energy harvesting Bluetooth low energy switch at Internet of Things
seminars From medical to industrial, every market is being disrupted by the Internet of Things (IoT). Along with their partners and distributors, ON Semiconductor will host a series of technical seminars in several key locations worldwide. The first seminar series about “Innovations in Smart Homes and Buildings” sponsored by ZF Friedrichshafen AG and Bosch Sensortec, features technical presentations from leading experts and hands-on demonstrations.
The seminars will present solutions using technologies which are transforming and digitising consumer and industrial markets within the Internet of Things. The focus is energy-efficient applications for access control, surveillance and interaction that improves comfort for the user. At each of the 11 locations, ZF Friedrichshafen AG will be presenting its Energy Harvesting product range. Participants will have the opportunity to get a hands-on experience of the batteryfree and wireless products, and to discuss projects and potential applications with the ZF sales team.
UK Seminar – 5th November – Milton Keynes
For further information on the seminar series from ON Semiconductor, please visit:
www.onsemi.com/PowerSolutions/
content.do?id=19362&utm_so urce=pr&utm_medium=press_release&utm_campaign=iot- seminars-2019&utm_content=link-tech-seminars-iot-2019-landin g-page=
For more information on the Energy Harvesting product range from ZF, please visit:
https://switches-sensors.zf.com/energy-harvesting/
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52
