Advertorials Secure Dual Authentication High Performance MIL-grade fans


ANOVA axial fans, where the air flows parallel to the fan rotary axis, are developed to provide rapid air transfer, circulate hot and cold air. They can be used in applications where military grade units need high- quality air flow/conditioning, including cabin heating and cooling, recirculation, electronics cooling, evaporator and condenser fan applications.


This product family is designed to meet the required military standards (MIL-STD-810, MIL-STD-461,


MIL-B-28873) and harsh ambient conditions; in accordance with ISO 1940-1 for the required balances and with the usage of two high-precision ball bearings, they have a long lifespan. The case and rotor parts are made of aluminium alloy; stainless steel is used as shaft material. All fans are coated in accordance with MIL-A-8625F and MIL-C-5541 standards to survive in harsh environmental conditions. Fans have efficient brushless DC or AC motors and provide higher flow performance.


2BK Partner Ltd. 0786 785 3812 nesli@2bkpartner.com


Cover plates with fixing straps for the cases of the AKG, GD and TUF series


Due to the wide range of applications for electronic cases, those must meet both design and functional requirements. For this purpose, Fischer Elektronik are extending the existing AKG, GD and TUF case series to include further designs with cover panels and simultaneously integrated fixing straps. Those case series are designed to accommodate standard Eurocards and non-standard PCBs. The fixing straps of the new cover panels contain special recesses for fixing screws and thus give the user the option of using the cases of the AKG, GD and TUF series for table, wall or ceiling mounting as well as in an environment with vibration disturbances. The mounting brackets are integrated on the long side of the cover panels and allow the cases to be mounted horizontally. For vertical case mounting, however, the straps can also be attached to the narrow side. The new cover panels with integrated fixing straps have the same hole spacing of the fixing points as previous standard designs from Fischer Elektronik, which means that the cover plates can be used as replacement or optional cover panels not only for new developments but also for existing customised case assemblies. In accordance with the standard case surfaces of the AKG, GD and TUF series the cover paels with fixing straps are available in natural-colour and black anodised surfaces. In addition to the standard designs of the fixing straps, the width of the lug, the seize of the recesses


for the screws and their position can be realised according to customer specifications. Further customised machining, inscriptions as well as other surface finishes are offered on request. The listed innovations of the optional cover panels with integrated fastening option as well as all innovations from Fischer Elektronik can also be found at www.fischerelektronik.de/en/


Fischer Elektronik GmbH & Co. KG +49 2351 435-191


info@fischerelektronik.de www.fischerelektronik.de/en/


LightCONEX Optical Interconnects for OpenVPX and SOSA-aligned Applications


Optical plug-in and backplane module connectors compatible with VITA 66.5 draft standard


Smiths Interconnect, a leading provider of technically differentiated connectors, cable assemblies, fibre optics and radio frequency components has announced the release of its new LightCONEX® optical plug-in and backplane module connectors compatible with the VITA 66.5 draft standard and aligned with the SOSA™ Technical Standard for VPX systems within rugged embedded computing applications and sensor systems. Smiths Interconnect has been a leader in the VITA 66.5 standard development under OpenVPX and is


an active member of the SOSA™ consortium, which references the VITA 66.5 draft standard. Tullio Panarello, Vice President and General Manager of the Fibre Optics and Components Business


Unit at Smiths Interconnect, commented: “The LightCONEX family of optical interconnects is the answer to the stringent size, weight and power (SWaP) requirements of today’s SOSA-aligned Defence applications. It offers flexibility, light weight, very high bandwidth, and forward compatibility with developing standards, while addressing the challenges of high bandwidth port density and volumetric density on the plug-in card”.


Smiths Interconnect www.cieonline.co.uk www.smithsinterconnect.com


Panduit has launched the SmartZone™ G5 Security Handle for ITE cabinets, designed to meet the most rigorous security challenges, both physical and digital, in today’s data centre environments. The multi- functional smart handle offers configurations with a keypad to compliment users’ operational requirements. The integrated keypad version enables dual authentication by allowing for a card swipe and pin-code combination. The G5 Security handle seamlessly mates with most data centre cabinets and has the capability to


read both low frequency (125kHz) and high frequency (13.5MHz) cards. The handle has been designed to be current and future compliant with regulations required within this environment and is also GDPR ready, HIPAA ready and PCI-DSS ready to ensure that this design meets data centres and users’ cabinet security needs. It can support 200 authorised users and features an integral humidity sensor allowing humidity sensing


to be optimally placed near the centre of the cabinet. The Status LED provides visual indication of the handle and security status.


Panduit


Pickering Electronics extends stand-off voltage for popular Series 104 high voltage reed relays


Improved performance, increase in equipment specification, and high voltage isolation protection margin are just some of the benefits of the new Series 104 4kV relays


Pickering Electronics has increased the stand-off voltage values for its prevalent small-size Series 104 high voltage reed relays for up to 4kV. For the newly introduced versions this means a 1000VDC stand-off voltage improvement on the previous Series 104 product offering. Commented Kevin Mallett, Technical Specialist at Pickering Electronics: “The higher stand-off voltage


improves the performance of the relay and allows for an increase in the equipment specification.” “It also means an increased high voltage protection margin for extra safety and security,” he added. Series 104 high voltage isolation reed relays are ideal for use in applications such as transformer and


cable testing or any other automatic test equipment where high voltages are involved. Where mains voltages switch, for example to control and isolate S.C.R. or triac gates, the devices are an ideal choice. Four types of dry switches are available for stacking on 0.25 inches pitch and capable of standing-off


1.5, 2, 3 or 4kV DC. The 3kV and 4kV versions benefit from an increased clearance between the switch and coil pins to accommodate the higher voltage. Higher voltage ratings are available upon request. The Series 104 range features one or two switches in a single package, 1 Form A, 2 Form A and 1 Form


B configurations as well as 5 V, 12 V or 24 V coils with optional internal diode. You can try the innovative designed reed relays free of charge by clicking here. The internal mu-metal screen eliminates problems that would be experienced due to magnetic


interaction when the relays are closely stacked. Mercury wetted devices are also available for applications where bounce free switching is required.


These are rated at 1500 volts DC minimum stand-off & 500 volts DC switching at up to 50 watts. Pickering Electronics


www.pickeringrelay.com New ST4 Toggle Series Rated IP68 and Multiple Options


E-Switch introduces the ST4 series to its industrial toggle product line. The robust toggle is rated IP68 for dust and moisture and offers a single pole or double pole circuit function with 2 or 3 positions. Select from ten different function options, three electrical rating options, and a 17mm metal or 22mm plastic bat actuator. The ST4 series offers four-terminal options – 3/16” quick connect, 1/4” quick connect, solder lug, and screw terminal. The ST4 industrial toggle


series joins the ST1, ST2, and ST3 series of heavy-duty toggles. These ST series toggle switches are UL approval. Series ST1 (1-pole) and ST 2 (2-pole) provide 20A 125VAC, 15A/277 VAC; 2.0HP 125-277VAC (maintained) and 1.5HP 125-277VAC (momentary). The ST3 (3-pole) series ratings – 24A 125VAC, 15A 277VAC and 2,0HP 123 – 277VAC. Common applications for high power switches include floor care and commercial appliances, industrial


controls, medical/dental equipment, HVAC equipment, kiosks for vending and ticket dispensers, and dashboards on off-road, auto, and boating vehicles.


E-Switch www.e-switch.com Components in Electronics March 2022 45 www.panduit.com


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54