TECHNOLOGY IN ACTION ADVERTORIAL
pressure cleaner/de-scaler for an agricultural equipment manufacturer, they turned immediately to Hydra-Cell Seal-less pumps. The biggest pumping problem with such heat treatment de-scaling
Hydra-Cell, the Pump for De-scaling W
hen a major producer of heavy-duty industrial cleaning machines and jet washers was commissioned to design and manufacture a high-
Alicat expands industrial automation protocol options with addition of Modbus TCP/IP
instrumentation. The new option allows PLCs running the Modbus industrial automation protocol to connect to Alicat instruments over Ethernet cable. Alicat instruments rapidly and precisely monitor and
A
control critical process parameters in chemical, medical, manufacturing and power industries. All the mass flow or pressure controller’s data, including: mass flow, volumetric flow, pressure, temperature, selected gas calibration, setpoint, and totalized flow can be output to a central PLC running a compatible automation protocol. Users may also change setpoint or gas selection, and issue other commands remotely. Now these capabilities are available in a Modbus intranet or internet environment, using the TCP/IP protocol.
Alicat Scientific +1 520.290.6060
info@alicat.com
licat Scientific has added Modbus TCP/IP compatibility to its line of mass flow, pressure, and liquid
installations is the solid scale particles that invariably bypass filtration stages to some extent in such re-circulating, closed loop systems. Such abrasive particles cause severe damage to pumps that rely on close internal tolerances for efficiency. Seal wear, caused by the finest particles can be expensive and at worst catastrophic for these types of pumps. Hydra-Cell diaphragm pumps have no dynamic seals to wear and no
tight internal tolerances, ensuring long-term efficiency and reliability with no seal maintenance. The Company had good past experience of using Hydra-Cell leak-free, low maintenance pumps but for this particular application the liquid flow requirements were substantially higher than previously encountered.
Hydra-Cell 01252 816847
The company will be showing its full range of products and capabilities on its stand, F9. Sales Manager Mark Ingham, says: “Sensors & Instrumentation is always good for us, as each year it seems to help us expand our national and
Talking the torque S
international profile a little bit more. Last year we found several new customers. He explains that because TorqSense is often used on development and testing work, the networking opportunities
at exhibitions are very important. Sometimes a conversation at a show leads to business a year or more later. “People with actual torque sensing requirements will make a point of coming to our stand, but we also get quite a lot of people who are passing and stop because they see something that they may need in six or eight months time.”
Sensor Technology Ltd 01869 238400
www.sensors.co.uk
Verderhus Screw Channel Centrifugal Pumps
erderhus screw centrifugal pumps are suitable for the handling of flowable slurries, sludges and solidladen media such as in wastewater treatment such as thick sludge, sewage and the recirculation of lime chemical. The range has excellent utility in agricultural and related facilities such as chicken necks and bone-laden animal waste in abattoirs and macerated food or crops in the production of bio gas.
V
ADVANTAGES VERDERHUS SCREW CHANNEL PUMPS Verderhus screw-channel pumps are suitable for the handling of flowable slurries, sludges and solid-laden media such as in wastewater treatment such as thick sludge, sewage and the recirculation of lime chemical. Verderhus screw-channel pumps are suitable for the handling of flowable slurries, sludges and solid-laden media where traditional centrifugal pumps would struggle and positive displacement pumps would have a more expensive life cycle cost. Excellent areas where the Verderhus excels is in wastewater treatment such as thick sludge, sewage and the recirculation of lime chemical.
• Abrasion resistant pump • Dry well, submersible or vertical spindle pumps • Gentle, low shear pumping • High BEP efficiency > 70% • Large Ø Solids • Low energy use • Low NPSHr
• Minimal clogging • Solids to <10% sludge, <30% slurry • Viscosities to 3000 cps • Max. flows 1500 m3/h • Max. head 55 mwc
APPLICATION AREAS Biogas, Chemical processing, Construction, Food & beverage, Industrial processing, Mining, Paper & pulp, Pet-food processing, Power stations, Slaughterhouses, Waste water treatment.
Verderhus 01924 221 020
www.verderliquids.com/int/en/purchasing-screw-centrifugal-pumps-verderhus/
CONNECTINGINDUSTRY.COM/PROCESS&CONTROL PROCESS & CONTROL | SEPTEMBER 2017 43
www.hydra-cell.eu
ensor Technology Ltd, the UK manufacturer of wireless torque and load sensors and strain gauge amplifiers is exhibiting at this year’s Sensors & Instrumentation Exhibition
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64