THERMAL MANAGEMENT & EMC Automating EMC testing
Nicholas Forsyth, senior engineer, at TÜV SÜD, says EMC compliance is a mandatory requirement in most markets, including Europe, the US, China, Korea, Australia and New Zealand
E
MC testing ensures that products meet regulatory requirements. It also reduces the risk of a costly non-compliance and improves product performance by avoiding failures in use, which could require product delays for new products.
As manufacturers are also under pressure to maintain quality, minimising the costs and time associated with EMC testing is vital. EMC standards have evolved to include broader frequency ranges and increased bandwidths, and the electromagnetic environment is becoming more congested with intentional and unintentional sources. This means that the requirement to measure and control them needs to change as well. Test methods must therefore adapt to emulate the environment and automation has increasingly become a requirement. Consequently, in EMC testing there is a shift from a manual to an automated approach. In many cases software helps a great deal the same parameters each time the test is performed. If set up properly, the software will take that data and allow the user to observe performance trends that would take considerably more time if performed manually.
market evolves there is a growing demand for EMC test laboratories to do more with the same resources. Despite this complexity, EMC testing must remain accurate and consistent. To be more effective, EMC testing needs to evolve along the lines of Industry 4.0.
For EMC testing, an automated software algorithm can use modelled test data to verify what output should be expected from the system under test. A machine learning tool can be trained on thousands of good and bad data sets and can identify if the shape of a trace shown on a plot is correct. Machine learning eliminates the need for
plots to be manually checked by engineers and supervisors, but the reality is that not all decisions can be fully automated, as human planning and interpretation are still key to successful EMC testing.
Manually measuring characteristics of a device to compliance standards is arduous, time-consuming and prone to error. These increase in complexity with their adoption of newer technologies.
Automation of the test process reduces delays through the provision of fast, reliable and repeatable testing procedures. There is also a need to automate the measurement of radiated and conducted emissions. Although the test equipment can be fully automated, there is still the need Under Test (EUT) to be in its desired mode of operation for each test. Now, if we consider a technology such as WiFi, there are many combinations of bandwidths, modulation schemes, frequencies and power levels that need to be tested. By automating the EUT, tests can be left alone to execute for hours and hours, without the need for engineers to intervene. This improves the consistency of more testing to be completed than ever before.
The automation of many aspects of EMC 46 JULY/AUGUST 2023 | ELECTRONICS FOR ENGINEERS
testing means that engineers no longer have to sit in a chamber drive room, watching tests being performed until they are complete. This automation means one engineer can operate tests in multiple chambers simultaneously - increasing the accuracy of results and reducing the time- to-markets for new products. Likewise, automated report generation allows results in tabular and graphical format to be produced in seconds. This means bottlenecks in producing reports at the end of testing are avoided completely. In addition, the information is 100% correct as it is assembled directly from the result data, which eliminates errors and reduces time spent checking reports.
Poor EMC can negatively impact product performance and function in a variety of ways. EMC testing helps to ensure that your device will continue to function as expected in the intended EMC environment. As manufacturers are under pressure to maintain quality, minimising the costs and time associated with EMC testing is vital. New automation techniques help to streamline the test process in the laboratory and ensures that the product’s time-to-market is optimised and costs minimised.
TÜV SÜD
www.tuvsud.com/en-gb
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74
