These ABS enclosures are designed for
comfortable single-handed operation by both right- and left-handed users. Applications include sensors, opto-electronics and opto-digital technologies, industrial image processing, measurement and control, stock and sales logging, communications and medical/laboratory equipment.
Each housing comprises four parts: top, base, handle cover and either a cable gland
or removable end panel. The control panel is recessed to accommodate a membrane keypad, push buttons and LCDs. Sensors can be mounted in the large front face. Simultaneous operation is possible using a cable connection or standard/rechargeable cells (2 x AA, 1 x 9V). Inside, there are fastening pillars for PCBs. SENSO-CASE measures 180 x 86 x 45mm and is available in two standard colours:
off-white and lava, although custom colours are available on request. Accessories include battery holders,a9V plug-in contact, wall holders, adhesive
foil, a pull relief cable clamp, cable grommets with strain relief, a ring eyelet, and self-tapping screws for fastening components, boards and PCBs onto pillars. SENSO-CASE can be supplied fully customised if required.
All models offer IP67 ingress protection in a
smart three-piece design (top, bottom, strap). The BW Series has a modular design which offers multiple standard configurations based on the three plan sizes. Customers can choose from various top and bottom heights and a selection of case and strap colours. The tops and bottoms are in impact-resistant polycarbonate while the straps are synthetic rubber. The pin-and-tuck strap is assembled between the top and bottom parts and provides
the IP67 sealing. This strap is perforated, making it breathable for added comfort. It is offered in eight colours: black, blue, gun metal, neon green, neon orange, orange, yellow and white. BW2 and BW6 each offer a choice of two strap lengths.
Offering high airflow rates and significantly improved efficiency, this is said to open up new possibilities for manufacturers of HVAC units, computer room air handler units (CRAH) and fan wall units (FWU), especially in data centres. The RadiFlow 630 was developed for applications
with low to medium back pressure. Thanks to the axial flow, high airflow rates can be achieved even in narrow air ducts, without the performance losses typically associated with these designs. At the heart of the concept is a newly-developed impeller made of glass-fibre-reinforced compositematerial. The diagonal impeller has six blades, significantly reducing flow losses. The result is said to be up to 10% higher efficiency.
26 The highly efficient EC motor is integrated into the impeller in a space-
saving design, reducing the fan’s overall length. A specially designed motor suspension distributes forces evenly across multiple mounting points and ensures smooth, quiet operation. RadiFlow 630 fans support demand-based speed
control via 0–10 VDC or MODBUS RTU. Variants with Active PFC (Power Factor Correction) reduce grid disturbances and minimise the need for external filters and infrastructure components. In combination with integrated EMC filters, international approvals, remote monitoring functions and the compact design, scalable climate control concepts with high power density can be implemented – from space-optimised
air handling units to FanGrid systems in modern data centres.
The fan array is available in two versions: one for 24 VDC
and one for 230 VAC. Both versions feature three high- performance 120mm axial fans with long-lasting ball bearings. Depending on the version, the fan array achieves amaximum airflow of up to 552m3
/h at 24 VDC or 336.3m3 /h at 230 VAC.
The fans are designed for reliable continuous operation and have a service life of 70,000 hours at an operating temperature of 40˚C. The sound pressure level is a low 45 dB. With a compact height of 1U and a width of 84 TE, the fan series can be seamlessly integrated into various 19-inch 4U (3+1) subracks as well as into HEITEC system enclosures. The HeiCool Lite is suitable for both standard applications
and customconfigurations. Standard card guides from the HEITEC product range mean it can be easily slid into place. HeiCool Lite features a toggle switch on the front panel
which allow you to manually turn the fan array on and off. Integrated touch protection above the fans enhances operational safety. The standard version generates an airflow from the bottomto the top, making it ideal for the targeted ventilation of mounted subracks in 19in cabinets. This also has a robust aluminium construction, an IP20
protection rating and compliance with relevant safety and EMC requirements. It also meets the requirements of EN 50155 and EN 61373, making it suitable for railway applications.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52
