FEATURE MATERIALS IN DESIGN & PROTOTYPING


Electroless nickel has many applications, and many are mission critical. But what happens when parts need repair or retouching? Selective electroplating offers a solution, as Thomas Chapman of SIFCO ASC explains


The advanTage of being selecTive…


N


ickel and nickel alloy surface coatings are widely used across multiple industries, where they offer a tough


finish that can offer significant wear and anti- corrosion properties. This makes these coatings indispensable for critical applications, especially where harsh conditions are prevalent – such as in aerospace, marine, petrochemical, and the oil and gas industries. In particular, Nickel-Phosphorous plating alloys have grown in popularity due to several unique physicochemical properties. While Nickel-Phosphorous alloys can be


applied electrolytically, they are more commonly applied through an electroless, autocatalytic process, due to the ability to provide coating uniformity across complex geometries –making them ideal for OEM components. Known as electroless plating, this technique does, however, have some drawbacks. Namely, this is when you need to repair or replate electroless Nickel- Phosphorous (ENP) coated parts. To explain, as ENP plating happens in an


immersion tank, replating of already coated areas can cause the part to be out of tolerance due to excess buildup of material. To overcome this, there needs to be either significant – if not cost prohibitive – masking, or risky chemical stripping of the entire part before replating. There is, however, an alternative: selective


electroplating. This process is focused only on limited, specific surfaces of a part rather than the entire geometry, so the issue of coating uniformity across varying geometries is no longer a concern. Consequently, when it comes to repair, touch-up and refurbishment of ENP coated parts, the selective plating process provides a viable option that can save significant time and cost. Components that might ordinarily be scrapped can be saved, all without compromising the quality or integrity of the part.


trAditionAl enp repAir


The traditional method of retouching or repairing ENP components involves stripping and replating the entire part, requiring the removal of the component from its setting – immediately creating downtime.


However, the repair of damaged ENP


components often involves chemical stripping of the entire part, which runs the risk of damaging the part beyond repair. While masking is possible, it can be complex and time consuming. Similar issues apply with original equipment manufacture, where mis- machining after plating can compromise quality, leading to scrap and waste. Equally, even small damage such as minor scratches


5 DESIGN SOLUTIONS OCTOBER 2021 2


in transit can result in rejection of the part. So, while returning components for electroless


nickel plating is an option, it inevitably involves more time, cost and risk. Which is where selective plating such as the SIFCO Process really come into its own, as many world-class manufacturers have discovered.


A beneficiAl process


With selective plating, nickel plating that mirrors the performance characteristics of ENP can be applied accurately to small and clearly defined areas without the need to immerse the part in a plating bath. This does away with the need to replate the whole part and, in many cases, the need to disassemble components too. More importantly perhaps, the plating equipment can be taken to the part and applied in situ, eliminating the need to remove it and all the associated costs of downtime and delays. Selective electroplating is actually a long-


established technology, originally developed in 1938. Today, the SIFCO Process of selective plating has approvals across multiple industries, including military, aerospace and energy, and comes with powerful recommendations. In selective (or brush) plating, an electric


current is run through a circuit which is completed when an anode – the plating brush – touches the component to be plated. This allows the deposit to flow onto the negatively charged part. This entire process is done without the need to immerse the part in a traditional plating tank. The deposit can be applied accurately and reliably to very localised areas without the need for post-machining. Deposition rates are also up to 60 times faster than tank plating, further minimising downtime.


plAting portAbility


Though it can be automated, selective electroplating is an effective manual process requiring minimal equipment – typically a portable kit which can be easily carried to facilitate the spot retouching. Apart from portability and being able to repair


specific areas, the plating quality of the SIFCO Process is comparable to tank plating in terms of performance, hardness and adhesion. Just like traditional tank plating methods, selective plating forms a metallurgical bond to the base material. The selective plating process can also deliver good results on aluminium substrates that may require ENP touchup. SIFCO ASC has a specially developed coating –


5709 Nickel-Phosphorous – the same plating alloy used in electroless nickel plating. With this, the


Before repair


After repair


plating operator can adjust plating parameters to apply different levels of phosphorus content depending on the specific application. Thus, with one plating solution, both low and high phosphorous type coatings can be applied depending on the desired surface characteristics. When applied with a high phosphorous content, the coating structure changes from crystalline to amorphous, resulting in a coating with superb corrosion resistance properties. Finally, the SIFCO Process offers a range of


environmentally safe alternatives. It also uses less energy and produces less effluent waste than tank plating, and brings considerable environmental benefits too. For operations committed to in-house


resources, the process can also be automated to deliver consistent application during both pre-treatment and plating. Data logging and traceability can be added to the list of benefits.


An optimAl solution


Electroless nickel plating is an established, effective and necessary process, improving the corrosion resistance of components across virtually all industry sectors. However, it is not an ideal solution for repairs and retouching – largely because, for repairs, it requires the removal and replating of the whole component. This, in turn, adds time and cost to operations. As a tried and tested alternative, selective


plating with the SIFCO Process delivers ease, speed and convenience. Most importantly, it creates a tough, corrosion resistant, finish on even the smallest areas, preserving the function and integrity of the component while minimising downtime and costs.


SIFCO ASC www.sifcoasc.com


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62