Test & measurement
Preventing asset failure and Production line shutdowns
manufacturing plants, maintenance teams want to aggregate data to continually evaluate an asset’s health and know if it is about to fail. Production managers are keen to catch process anomalies that result in faulty products or packaging before these products leave the production line. Safety managers need to detect excessive heat buildup on fuel, hazardous material, and electrical components before combustion occurs and a fire breaks out. By deploying thermal cameras for condition monitoring, process control, and fire prevention applications, plant managers ensure maximum uptime and avoid catastrophic events.
T Why Thermal?
Because temperature changes can be an early indicator of equipment deterioration, non-uniform temperature profiles on products, or a hotspot area, thermal automation cameras are a premier choice for plant managers. Radiometric thermal cameras yield a temperature value for every pixel in an image and clearly visualise the temperature differences of a surveyed area. Upon exceeding a specific temperature threshold, a thermal automation camera sends an alarm, or, if integrated with other control processes, triggers an action to deescalate the situation.
FlIr auTomaTIon cameras In acTIon
FLIR offers an array of radiometric thermal cameras that are highly effective automation solutions. Here are three examples of how FLIR automation cameras made a difference for critical facilities in the industrial sector.
Steel Mill and Condition Monitoring: Few equipment failures are as dangerous and damaging as a steel breakout at a steel mill, where a ladle or torpedo enclosure ruptures and pours out hundreds of tons of 1,400°C molten iron onto the plant floor. Because hotspots can occur on this machinery in less than a minute, engineer service company ANT Automation provides its steel mill customers with a Continuous Infrared Analysis (CIRA) platform. The cornerstone of the CIRA solution is reliable thermal imaging from a FLIR automation camera, which monitors the entire surface of ladles and torpedoes; provides historical temperature data to distinguish between typical splashes and hotspots, and sends an alarm to personnel to act upon true hotspot detection. As a result, ANT Automation customers experience heightened equipment protection, cheaper insurance premiums, and greater peace of mind.
52
hermal cameras are not only used to safeguard property and people but also to protect mission-critical equipment. At
Paper Mill and Process Control: At paper mills, calendering - or the process of putting paper webs through hard pressure rollers to smooth the paper - is important. However, excess moisture can occur on the paper web between the rollers, damaging roll covers and causing downtime. One North America paper manufacturer experienced an average of 30 moisture events annually where each event equated to $100,000 in losses. To remedy the situation, the manufacturer turned to Eigen, an AI-enabled vision solution provider. Eigen provided a platform that featured FLIR automation cameras, an edge computing device, and analytics software. The FLIR cameras continuously monitor the paper web prior to it entering the calender machine and upon detection of cold streaks, trigger an unload alarm so that calendar stacks are opened and roll covers are cleaned. Eigen estimates its automation solution will result in 300 unloads for a total savings of $1.2 million.
Waste Facility and Fire Prevention: Based in the town of Legnago in Northern Italy, Ecologica Tredi operates an 11,000 square meter facility that specialises in the recovery and treatment of special, hazardous, and non-hazardous waste. Should material combust and cause a fire at the plant, the consequences include unwanted pollutants released into the environment, damaged equipment, and lengthy business interruptions. To enhance workplace safety and meet regulation compliance, Ecologica Tredi partnered with Thermostick Elettrotecnica, who specialises in unconventional fire detection systems. Thermostick Elettrotecnica provided a comprehensive monitoring control and alarm system based on FLIR automation cameras. These FLIR cameras monitor work and storage areas and upon specified alarm events, can activate sprinklers or cannons. Thermostick Elettrotecnica also deployed a FLIR AX8 camera to survey material on the conveyor belt coming out of a shredder. Upon identifying abnormally high temperatures, the belt stops. After completing its audit of the facility, the Ministry of Interior said Ecologica Tredi was one of the most equipped for fire prevention.
These are just a few deployments that demonstrate how automation solutions, like the FLIR A400/A700 Smart Thermal Sensor camera, can be used to avoid unplanned outages, production line shutdowns, fires, and other “surprise” events that cause substantial disruptions and financial loss.
October 2021 Instrumentation Monthly
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78
