Watchlog Wireless Sensor Transmitters
Watchlog Wireless Software for local sensor monitoring, logging & alerting or integrate to existing systems.
Watchlog Wireless Sensors, Software and Vision Cloud platform
Hydrotechnik’sWatchlog Wireless is a complete end-to-end solution for monitoring Pressure, Temperature, Flow, Displacement, Torque, Level etc. in a factory or mobile setting to get data from machinery to a local PC/on-site systems, or into the cloud for remote monitoring.
Watchlog Wireless transmitters are capable of pushing data from 800m up to 1.6Km, depending on the transmitter selected and the factory/asset environment. Up to 60 sensors of varying types can sit on the same local wireless network and accessed by a single gateway.
Gateways or receivers can be either local for monitoring performance within a factory setting directly on a PC or HMI, or gateways can push data directly into the cloud for long term monitoring and alerting/ alarming. When using a local PC, the free to use monitoring and trending software shows all sensors connected. A toolkit helps with locating transmitters and receivers if there is any local noise from other wireless equipment or machinery/devices. The toolkit helps when setting up a system and makes deployment reliable and robust.
Typical applications are where a company wishes to rapidly deploy sensors for monitoring critical assets such as Engines, Presses, Generators, Gearboxes, Jacking platforms and Silo Levels etc. where
laying cabling would be onerous, costly or time intensive. Wireless sensors can be moved from job to job if they are not required permanently in one location.
Hydrotechnik have gained a lot of experience in deployingWatchlog Wireless sensors and gateways in a whole array of settings. One interesting example is on major construction sites where excavated earth or structures need to be supported via hydraulic jacks. Watchlog sensors are deployed to monitor the hydraulic pressure in each jack as well as any linear displacement of the asset being supported. Data is pushed to ourWatchlog Vision cloud platform for long term monitoring however, the key to the success of these systems is the ability to set alarms if/when something changes. Engineers are alerted if the structure moves by fractions of a millimetre or jacking pressures drop below a set threshold. The Watchlog Vision cloud platform allows a company with multiple sites to switch easily and keep abreast of the performance of each location.
Wireless Sensors can be powered via AA or D cell batteries within the transmitters or a 5-30VDC supply, depending on the sensor and the data transmission rate battery life will be a minimum of 6 months but more typically is 2 years of continuous use. Data can be transmitted
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78
