“Machining moderately complex titanium parts up to 1
m in length, for example, where primarily three and posi- tional four-axis cuts are required, requires machine tools with structural design to machine at low amplitude ranges in less than 350 Hz—especially at the 20, 90, and 320 Hz ranges,” Walker explains. “In heavy metal machining, all of the materials in the machine tool structure must stay within a specific range of stiffness and resiliency so that when cutting, the spring memory of the machine is very repeatable. This repeatability is paramount for tightly controlling the cutting edge machining parameters as they pass throughout
new patented solution for turning and milling operations
For efficient high-precision turning of workpieces along their whole length without re-tooling. In the same operation there may be also milled a groove or toohting. This could save a re-tooling, i. e. to a vice, which may turn out to be both - time and money saving.
→ Balanced driving discs without radial tolerance → Spring cushioned centre → Stable, even longitudinal stop → Smooth mechanic balance for the driving discs → High concentricity
I HAVE PROBES ON MY MACHINE; I DON’T NEED A PRESETTER
Misconception #8
The Truth Is: A probe may be an effective way to verify tool lengths betwee but it is not the most efficient way to set your tools. A “guess-and-check” proc making adjustments wastes valuable cutting time. A Speroni MAGIS Tool Pre can verify runout, measure length, diameter, radius, and other geometries measuring icons, and it can also inspect tools for wear. Spend less time ad and more time cutting.
→
Drill Chucks Live Centers Lathe Chucks Vices
The notch-free nut design of our Mega Micro Chuck prevents vibration at for superior balance and concentricity. It not only eliminates whistling noise splattering, but also assures increased strength of the nut itself. The supe design of the body offers added strength for micro end milling, and reduces in long reach applications.
Gripping Technology Power Chuck Technology Mandrels Tool Clamping Systems Special Designs
Learn about more common misconceptions and p Truth solutions at www.bigkaiser.com/truth or call 888
We’ll improve your most demanding applications or we’ll take back our products – Gu Visit us at booth #W-1600
materials. To cut heavy metals, the machine needs ample torque. The spindles should produce 2000 ft-lb (2711 N•m) of torque at 100 rpm and large servomotor drives on fine- pitch lead ballscrews.” ME