between 90 and 260V AC these units can be used in diverse supply networks worldwide. Through the use of an onboard potentiometer the output voltage can be adjusted from 22.5 up to 28.5V DC, and styles are available with an output cur- rent strength of 2.5, 5, 10 or 20 A. Turck Inc.
The new ScribeWriter features adjustable marking pressure, making it easy to mark soft or hardened tools on CNC machines. System is able to mark on a RC
60 hardened steel plate
at a feed rate of 1000 mm/min with marking depth of 0.1 mm. Marking tool allows mark- ing the workpiece while machining without the need for secondary marking operations. Part
numbers, date codes and even logos can easily be created with this scribing tool. Installs easily on machining centers or CNC lathes. No spindle rotation is required. System uses standard engraving software, but unlike engraving, scribing does not require the use of delicate cutting tools and high- speed spindles. Tapmatic Corp. Ph: 800-854-6019 Web site: www.tapmatic.com
Additive Manufacturing Systems
The AM125 and AM250 additive manufacturing systems use a laser melting process to produce fully dense metal parts direct from 3-D CAD data using a high-power fiber laser. Parts are built layer by layer, in thicknesses ranging from 20 to 100 µm, using a range of fine metal powders that are fully melted in a tightly controlled atmosphere. Key features include vari- able powder delivery, ultra-low oxygen content in the build atmosphere, and a safe-change filter system to minimize
2166 Gold Hill Road, #C-3 Fort Mill, SC 29708 Tel: 803-802-3010