Feature Hazardous Area Equipment
Gary Johnson, technical manager at COOPER Crouse-Hinds UK, explains the importance for engineers to understand IP protection ratings when specifying enclosures for hazardous area electrical applications Put to the test
t is not unusual for engineers to not fully understand what they require in terms of the IP protection rating of an enclosure and whether what they are asking for meets the end user’s tech- nical specification. This is the view of COOPER Crouse-Hinds, a manufacturer of a range of enclosures for industrial and hazardous environments. The function of an enclosure is to protect the internal components from excess heat, humidity, dirt, dust or water and could be used in a haz- ardous gas environment such as an oil platform or petrochemicals plant, or for a dusty environment such as a flour mill or sugar production plant. In either scenario, appreciating the difference between enclosure IP rat- ings, along with the requirements for one that is fully certified for use in a hazardous gas or dust environment, is crucial. Also, in terms of modifying an enclosure, either prior to or after instal- lation, it is equally important that the installer and end user fully appreciates what they are allowed to do with that Exe or Exd enclosure so as not to adversely affect its protection rating or invalidate the certification.
Right and below: most of the hazardous area enclosures
manufactured by COOPER
Understanding IP differences I
Crouse-Hinds are made from
electro-chemical polished 316L high grade stainless steel as standard, as this offers enhanced corrosion resistance over other finishes
Making changes With an Exd enclosure, the box cannot be modified once it has been manufactured and assembled - other- wise the protection rating will be affected. For example, drilling new cable entries must only be carried out by the manufacturer or by an approved local assembler (distribu- tor). Once an Exe enclosure leaves the factory, although this is in a certi- fied state, end users may then modify that box prior to or after installation within certain guidelines.
Any alterations need to be commu- nicated to the manufacturer or local assembler to ensure that the correct certification is given or maintained. These modifications normally involve adding some extra cable entries or terminals. COOPER Crouse-Hinds normally supplies a range of standard hazardous area Exe enclosures to its network of approved local assemblers. They are then able to carry out modifications to those enclosures to suit the application, without adversely affecting the certi- fication or protection rating.
20
Enclosures for hazardous gas or dust environments are normally manufac- tured from stainless steel or GRP, but also painted steel for some indoor, sheltered applications. Many cus- tomers don’t fully appreciate that an Exd or Exe enclosure has been put through a series of arduous tests. These tests include thermal condi- tioning which represents rapid ageing - simulating 20+ years of oper- ation in the field. Mechanical impact tests are also used - in places that are considered to be the weakest points of the enclosure - something that the test houses are experts in finding. Furthermore, if the material is con- sidered to have a reduction in resis- tance to impact at lower temperatures, the box is also impact tested at the lower end of the box’s operating temperature range. Once installed in a harsh hazardous area, it is often difficult to service an enclosure due to its environment, or it could get inadvertently knocked or bashed. Therefore, these tests are extremely important because the enclosure must remain intact in order to continue performing the intended function for protection.
Standards
European and international standards for hazardous area enclosures have become more strict in recent years, par- ticularly in terms of impact and thermal tests. In the latest standards, all open- ings on the enclosure are tested (opened and closed) prior to their IP test. Many companies can offer industrial grade enclosures with an IP66 rating, but for hazardous areas, customers need to be absolutely certain that the enclosures they source are fully certified boxes that have been tested in terms of tempera- ture ratings and impact protection. It is generally accepted in the oil and gas industry that hazardous area enclo- sures need to be manufactured from 316L stainless steel as a minimum. Most of the hazardous area enclosures manu- factured by COOPER Crouse-Hinds are made from electro-chemical polished 316L high grade stainless steel as stan- dard, as this offers enhanced corrosion resistance over other finishes. GRP enclosures also offer technical advantages. The material is often graphite loaded in order to avoid a build-up of electrostatic charge, which is important for hazardous area appli- cations. Moulded, non-metallic enclo- sures also enable the manufacturer to construct very modular or flexible design features for the customer, including quick fitting of components such as pushbuttons, switches, lamps, and so on.
Non-metallic enclosures also enable you to design low sided enclosures for easier, faster wiring. With stainless steel fabricated boxes, it is a little more difficult to offer these features, but fabricated steel enclosures are very flexible in the size ranges offered. Special sizes can be quickly included, and they can also be provided in much larger sizes if required.
COOPER Crouse-Hinds
www.cooperindustries.com T: 02476 308 930
Enter 216 APRIL 2012 Electrical Engineering
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44