Products Cases & enclosures
Safely testing electrical products Intertec has introduced a range of highly insulated outdoor enclosures to protect larger-scale instrumentation installations. The BASIC VARIO range of wall- or floor-mounting enclosures is made using the company’s sandwich-construction technique, with GRP (glass reinforced poly- ester) skins enclosing a thick layer of insulating foam. This results in a thermal conductivity or 'k' value rating of ~1.5W/m2K, efficiently protecting against frost and con- densation and/or providing regu- lated temperature environments for sensitive field instrumentation. In addition, the long fibre reinforced grades of GRP sheeting employed by Intertec provides great structural strength that almost matches stainless steel – for just a quarter of the weight. As standard, these are rectangular- shaped in three sizes: 105 x 64cm,105 x 84cm or 105 x 104 cm (41.3 x 25.2in, 41.3 x 33.1in or 41.3 x 40.9in),with a depth of 35cm (13.8in). These deliver a range of volumes that sit between the typical upper limits of many field instrument enclosure ranges
To enable the safe and controlled electrical testing of products in compliance with EN50191, Seaward Electronic has launched the Clare Visor electrical safety test enclosures. Available in two standard sizes, these are manufactured in heavy duty insulating plastic and have a special pallet system to allow the fast and simple insertion of different fixtures to accommodate the testing of appliances and electrical/electronic devices. A wide field of view is provided by its large clear visor, and a counterbalance lift mechanism provides fast access to the equipment being tested with minimal operator effort.
The enclosures can be fully interfaced with electrical testing instrumentation for automated production line routines and can also be incorporated in laboratory-type environments for testing during product design and development stages. They are supplied fully wired, fully interlocked and can provide an out of the box solution which specifies safe working conditions for electrical testing.
Seaward Electronic T: 0191 586 3511
www.seaward.co.uk Enter 688 Insulated outdoor enclosure range
and the smaller sizes of many outdoor cabinets; and are large enough to accommodate several field process transmitters. Custom sizes can also be produced. Additional features include IP65 ingress protection, with Type 4X pending approval, a large hinged door (with or without windows), flexible tube and cable entry, and they have flat exterior surfaces and are free of any overhanging edges, allowing enclosures to be packed side by side or on top of each other. Intertec Instrumentation T: 0800 756 1102
Enter 689
Enter 17
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56