This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
Refrigeration System Products SUCTION ACCUMULATORS
Designed to protect the compressor from liquid re- turn. The suction line may trap/accumulate quanti- ties of liquid which are suddenly dumped on the compressor as it starts up, resulting in compressor failure. Proper use of a suction line accumulator installed in the suction line, prior to the compres- sor will eliminate this possibility. Vertical accumu- lators feature copper nipples and fusible plug.
CAT. NO. MFG. NO. TONNAGE RANGE
3R615 3R616
3701 3702
3703
SUCT. LINE SIZE
DIMENSIONS LENGTH x DIA.
1/4 to 2 5/8" I.D. 6-5/8 x 4" 1/4 to 2 5/8" I.D. 10-5/8 x 4"
4G9304 HP3702 1/4 to 2 5/8" I.D. 10-5/8 x 4" 4G8589 HP3703 1/4 to 3 3/4" I.D. 10-5/8 x 4" 3R617 3R618
3738 1 to 4
4G9305 HP3738 1 to 4 3R619 3R620
3700 1 to 9
1/4 to 3 3/4" I.D. 10-5/8 x 4" 7/8" I.D. 13 x 5" 7/8" I.D. 13 x 5" 1-1/8" I.D. 15 x 6"
3706 2 to 17 1-3/8" I.D. 20-1/4 x 6" RECEIVER
Designed to store liquid refrigerant on systems utilizing TXV's. this is a vertical receiver with 430F fusible plug.
Designed to provide a maximum of heat transfer efficiency with a minimum of pressure drop. They are conservatively rated in horse- power and therefore easy to select for a particular application.
Installation is simplified as connections are of proper size to match suction and liquid lines of standard units. Installation is neat as fit- tings are in the end caps and lines remain parallel.
Designed to reduce pulsation and vibration of refrigerant thru the discharge line. The discharge muffler smoothes out the pulsation and reduces the associated noise in the space.
CAT. NO. MFG. NO. CONNECTION OD 5/8"
10R3478 M5
MAX TONS 5
DIMENSIONS DIA. x LENGTH
2" x 7-7/16" EACH $88.21
SUCTION LINE ACCUMULATORS
U-Tube, steel, suction line accumulators are designed for maximum flow with minimum pressure drop. Models are approved for AC, HP and refrigeration systems to protect the compressor from liquid re- frigerant flood back and provide adequate oil return. Includes 430 F integral fuse plug.
ANGLE CHARGING & PURGING VALVES
Designed for installation in branch or run of solder type tee to provide convenient system access for charging and purging. Compact design forged brass body. Cap and chain included. Rated up to 700 psi.
8G9952 PA4065-9-5C 1/5 to 2-1/2 5/8 ODF 9-5/8 x 4" 8G9953 PA4065-9-6C 1/5 to 3 3/4 ODF 9-5/8 x 4" 8G9954 VPA589-7RD 1/4 to 4 7/8 ODF 9-5/8 x 5" 8G9955 PA3060-15-5 1/4 to 2-1/2 5/8” ODF 15-1/16” x 3” 8G9956 PA3060-15-6 1/4 to 2-1/2 3/4” ODF 15-1/16” x 3”
VIBRATION ABSORBERS
Eliminates vibration and dampens noise on air condition- ing and refrigeration equipment. Constructed of seamless, heavy duty metal hose covered with a high tensile bronze braid. Each unit is pressure tested, thoroughly cleaned and highly polished. They are electronically dehydrated, ends sealed with plastic caps and individually boxed. UL listed.