This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
The new “ZD” Series of dampers are designed for performance and economy. These new dampers offer unparalleled performance in leakage and rigidity. The strong 24 volt spring return motor insures worry free operation for years to come. Its simple two wire design makes it easy to wire. The power close, spring return open feature insure fail safe operation.
ZD dampers are ordered by dimension 1 by dimension 2. Motor is always mounted on dimension 2 side. Example: a ZD 10 x 8" is a 10" W x 8" H damper with the motor on the 8" side. A ZD 8 x 10" is a 8"W x 10"H damper with the motor mounted on the 10" side. Larger sizes are available.
CAT. NO. SIZE (W x H) EACH 1C201 8 x 8" 1C260 8 x 10" 1C261 8 x 12" 1C262 8 x 14" 1C263 8 x 16" 1C264 8 x 18" 1C265 8 x 20" 1C266 8 x 24" 1C202 10 x 8"
1C219 10 x 10" $292.47 1C279 10 x 12" $301.44
CAT. NO. SIZE (W x H) EACH 1C280 10 x 14" $354.73 1C281 10 x 16" $317.03 1C282 10 x 18" $323.80 1C283 10 x 20" $330.41 1C285 10 x 24" $551.05 1C203 12 x 8"
$287.98
1C220 12 x 10" $301.39 1C240 12 x 12" $301.35 1C204 14 x 8"
$292.47
1C221 14 x 10" $308.11 1C241 14 x 12" $316.98
CAT. NO. SIZE (W x H) EACH 1C205 16 x 8"
$295.83
1C222 16 x 10" $316.98 1C242 16 x 12" $320.57 1C206 18 x 8"
$301.39
1C223 18 x 10" $323.70 1C243 18 x 12" $329.32 1C207 20 x 8"
$305.87
1C224 20 x 10" $330.41 1C244 20 x 12" $327.12 1C245 20 x 14" $352.55 1C246 20 x 16" $369.13
CAT. NO. SIZE (W x H) EACH 1C247 20 x 20" $429.89 1C208 22 x 8"
$312.55
1C225 22 x 10" $348.25 1C209 24 x 8"
$319.29
1C226 24 x 10" $342.65 1C210 26 x 8"
$340.46
1C227 26 x 10" $363.69 1C211
28 x 8" $348.25 1C228 28 x 10" $378.39
CAT. NO. MFG. NO. USED WITH: 1C1227 1C1069
MSTN FPC FREEZE PROTECTION CONTROL
This two wire temperature sensor is designed to easily clip on to the suction line and monitor suction line temperature. The FPC opens at 36°F +/- and when wired in the Y leg, will cycle the compressor off to control capacity in supply-to-
return by-pass applications. The FPC closes at 46°F +/-, making the Y leg and cycling the compressor back on.
CAT. NO. MFG. NO. EACH 1C1060 FPC
$100.04 AT72D 40VA TRANSFORMER
24 volt transformer provides low voltage power source for operating up to 5 actuator motors. Use additional transformer for each additional 5 motors on system.
CAT. NO. MFG. NO. EACH 1C901
AT72D1683 $55.70
ACTUATOR MOTORS M847D1012 ZD & ARD Dampers
EACH $234.26 Obsolete AOBD Dampers (old style) $259.15 SPC STATIC PRESSURE CONTROL
The SPC is used to sense the supply air static pressure and control a modulating by-pass damper, MOBD/MARD, to maintain a set system static pressure as zone dampers open and close. The SPC has a range of 0.1" to 4.0"W.C., with a fixed differential.
CAT. NO. MFG. NO. EACH 1C1059 SPC
$461.38 SDCR SLAVE DAMPER CONTROL RELAY
When 2, 3, or 4 dampers are to be con- trolled simultaneously by a single switch or thermostat, the SDCR control provides a wiring panel and 4PDT plug in relays to simplify wiring and control of dampers.