This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
Installation Accessories CONDENSER MOUNTING BRACES BY DIVERSITECH
These mounting braces allow the hanging of outdoor units to the side of a building. They screw into the wall of the building so that the unit can rest on top of the brac- es. No need to worry about ground settling or landscaping. Braces are constructed of heavy angle steel and drilled to allow the unit to bolt to them. Support arms (2) are included. Primed with beige paint.
CAT. NO. MFG. NO. WEIGHT 1R345
EACH ACB-30 30" Long Braces $84.78
1R345A ACB-36 36" Long Braces $62.75 1R345B ACB-42 42" Long Braces $71.08
CONDENSATE DRAIN HOSE
Most Mini Split units use 5/8" plastic drain hose. Slim Duct drain hose is designed with a cuff every 39" which can be cut to produce a 5/8" diameter female soket to press onto the conden- sate fitting on the indoor section. Slim Duct hose is an ivory colored, injection molded, non-kinking, weatherproof, corrugated hose for condensate application. Supplied in an easy feed carton. The adapter allows connection of the mini-split flexible condensate tubing to PVC pipe. Use of this adapter to PVC allows straighter condensate piping runs at a lower cost than runs with flex tubing only.
CAT. NO. MFG. NO. DESCRIPTION 8H1018 DH-16
EACH 5/8" x 164' Coil Slim Duct Hose $100.91 8H1018A DSH-14-16V Adapter - Flex Tube to PVC $8.46 REFRIGERANT LINE SETS
Matched sets of copper tube suction and liquid lines for split-system air conditioners. Line sets are factory cleaned. Closed cell insulation is provided on both liquid and suction line on all sets except 3/8"-3/4" combinations which are insulated on suction line only.
CAT. NO. LINE SIZE O.D. LIQUID
CORROSION GRENADES
for Sanyo & Fujitsu split system air conditioners and heat Pumps
These are 100% zinc anodes designes to dra- matically reduce the effects of salt spray on outdoor units. The corrosion grenade acts like a sacrificial anode in a water heater, or the sacrificial anodes on boats used in salt water. Electrolytic corrosion between the dissimilar metals used in an outdoor unit is exacerbated by the introduction of salt water. This anode simply clamps onto the compressor suc- tion line and becomes the sacrificial metal. Thereby protecting the other metals (includ- ing aluminum).
CAT. NO. MFG. NO. DESCRIPTION EACH
1X4000C ACZ-5/8 Corrosion anode for 5/8" suction line $25.81 1X4000 ACZ-3/4 Corrosion anode for 3/4" suction line $29.36 1X4000A ACZ-7/8 Corrosion anode for 7/8" suction line $29.36 1X4000B ACZ-1-1/8 Corrosion anode for 1-1/8" suction line $31.83
15 ft. $143.43 20 ft. $158.33 33 ft. $226.80 50 ft. $510.95 15 ft. $138.89 20 ft. $160.74 25 ft. $305.90 33 ft. $238.89 50 ft. $326.92 20 ft. $184.98 30 ft. $251.13 50 ft. $370.98 30 ft. $385.75 50 ft. $593.11 25 ft. $219.04 30 ft. $249.35 50 ft. $373.90 20 ft. $199.38 30 ft. $260.21 40 ft. $472.75 50 ft. $558.15
POLYMER RISER - 18"
Ivory colored, polymer risers provide simple and secure mount- ing for piping systems, duct runs, cable trays, and mini-split outdoor mounting. Manufactured from exterior grade materials. Capacity 397 lbs.
DESCRIPTION EACH 8H1064R 87762(PR-351N-M) 4”H x 18”L Polymer Riser $18.89