This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
DIMENSIONS PACKAGE QTY. SQ. FT. PER PIECE WEIGHT EACH 6” x 72” x 0.625” 16
4W502 235327-PLY 6" Plywood Return Bend 8” x 48” x 0.625” 6 4W504 235337-PLY 8” Plywood Return Bend 9” x 48” x 0.625" 6 4W506 235377-PLY 2" Plywood Furring Strip 2” x 48” x 0.625" 25
Note: Furring strips are to be used in conjunction with 8" return bends to facilitate proper spacing of the RAUPANELs, and to provide a nailing surface for the floor covering.
RAUPANEL INSTALLATION ACCESSORY Use the deburring tool to eliminate burrs and sharp edges after cutting RAUPANEL.
CAT. NO. MFG. NO. DESCRIPTION PACKAGE QTY. WEIGHT EACH 4W508
235387 Deburring Tool 10
BRASS HEATING MANIFOLDS PRO-BALANCE®
With Gauges
Delivered pre-assembled and ready to install. Use with 3/8", 1/2", 5/8", and 3/4" RAUPEX pipe. Compatible with manifold valve actuator 260166 (see Thermostats and Manifold Valve Actuators). Order manifold-to-pipe connectors separately (see Manifold Connections and Valves).
Each manifold comes complete with: • 1" NPT supply & return manifold isolation valves with ther- mometer housings (mini-thermometers 250218 sold separately)
• Air vent/fill ports • Visual flow gauges (GPM) on supply side • Circuit balancing/isolation valves on return side • Mounting brackets
Manifolds are type L copper with open ends, in sizes indicated. Copper outlets are high- temperature brazed (lead-free) into headers. Each manifold is 72” long with 24 outlets at 3" on-center. Manifolds can easily be cut to length. Do not exceed maximum flow rates listed above. Use with REHAU fittings and valves to assemble complete manifolds for heating applications.
8.6 lbs $450.59 9.5 lbs $531.61 10.5 lbs $612.73
19.3" 11.5 lbs $702.82 20.0"
12.1 lbs $801.94
CAT. NO. MFG. NO. MAX GPM HEADER SIZE OUTLET SIZE PACKAGE QTY. WEIGHT EACH 4W100 4W101 4W103
250810 20 250820 32 250827 32
MANIFOLD HEADER STOCK 1"
1-1/4" 1-1/4"
1/2" 1/2" 3/4"
5 4 4
CAT. NO. MFG. NO. DESCRIPTION 4W105 4W106 4W107
261326 1" x 1/2" Copper Manifold 261336 1" x 1/2" Copper Manifold 261346 1" x 1/2" Copper Manifold
PRE-CUT MANIFOLD STOCK 1"
1" 1"
Note: Additional manifolds thru 2” dia. Tubing available on special order. MANIFOLD MOUNTING BRACKETS CAT. NO. MFG. NO. DESCRIPTION
4W114 261266 Plastic manifold mounting brackets for 1” and 1 ¼” manifolds (pack of 2 brackets) 4W088 80649004 Metal manifold mounting brackets for 1” and 1 ¼” manifolds (packed each, 2 required) $10.86
EACH $55.31
• Four (4) drywall screws and four (4) self-tapping screws • Maximum flow is 2.0 GPM per circuit; 16 GPM total • Can fit within a 2" x 4" stud wall, only 3-1/4" deep • Can be joined to other manifold sections using 1" BSPP unions (260407)